I am new to using sister clips and ready to replace the halyard. What do you recommend I use to fasten the clips to the line? Seizing wire? Thanks in advance for your suggestions.
--
J.D.
1981 Prindle 16
1978 Y-Flyer
Akron,OH
USA
--
quick question..sister clips prindle jib halyard
-
- Rank: Lubber
- Registered: Jun 14, 2015
- Last visit: Jul 19, 2016
- Posts: 16
Posted: Jul 09, 2015 - 12:33 AM
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jul 09, 2015 - 03:14 AM
I'm not 100% sure of what you mean....but, I use sister clips each spring, to hoist the jib, then remove the extra line til fall.
My clips each have a small hole. I put the line through the hole, & tie a single small stopper knot. that's it. Mine look like this;
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jul 09, 2015 - 09:06 AM
Hog rings work best -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jul 09, 2015 - 11:36 AM
Hog rings and then cover with electrical shrink tubing so they don't tear your jib.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Jul 09, 2015 - 02:42 PM
You all like to spend money. Sister clips, hog rings, shrink tubing.......
Tie a sheet bend.
https://en.wikipedia.org/wiki/Sheet_bend
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jul 10, 2015 - 09:36 AM
The smaller the attachment the easier it is to go through the jib luff when it is zippered
Hog rings were used when they were new from the factory
