I kept getting stuck in the sand when backing my Nacra to the waters edge so I made a tongue extension for about $100. I removed the coupling that was on the tongue then I bought a square tube that was slightly smaller than the size of the tongue and a new smaller coupling for it. Then I slipped the tube inside the other one and drilled thru both to make sure the holes aligned.
There is a hole and pin near the end and one about 48" back. I made sure I left at least 18" overlap inside. Used hitch pins to hold them together.
Edited by arch on Aug 10, 2015 - 12:57 PM.
--
Aquacat 12 (sold)...'87 Nacra 5.8 (sold)...'03 Nacra Inter18 (sold)
Venture 15 (sold)....'89 Nacra 5.8 (sold)...'91 Nacra 5.8NA (sold)
'99 Nacra Inter20 (sold)
--
