hello, I just picked up a Gibbs shark folding cat, and can't seem to find info for it, like tips or tricks to folding and unfolding it, etc, and where would a good source of parts be? pics would be great so I can finish her as factory would have.
--
work sucks, let's fish
--
new Gibbs shark
-
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 30, 2015 - 11:09 PM
-
- Rank: Lubber
- Registered: Oct 06, 2004
- Last visit: Aug 31, 2015
- Posts: 6
Posted: Aug 31, 2015 - 12:42 PM
there's a lot of helpful and smart folks on this site and catamaransailor.com I'm surprised you don't have any replies- but it's Monday and you'll have some more by after lunch. -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Aug 31, 2015 - 01:00 PM
Type in shark catamaran under "search" on this page & you will see reference to a 1963 Gibbs someone found a few months ago. Lots of questions answered. Pete -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 31, 2015 - 01:07 PM
i read about that one, it did have some info. any ideas where I could find the hin? looked in the usual places, transom, back of hulls, etc.... going to need it for registration
--
work sucks, let's fish
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Aug 31, 2015 - 01:32 PM
Mudslinging79, Welcome to TheBeachcats.com. You've got a cool boat there, be sure and post some photos.
You've also got a fairly rare boat so be patient but you'll find help. There used to be a Shark Association website but it's gone away and I haven't found a replacement.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 31, 2015 - 03:04 PM
well, photobucket isnt my friend...
--
work sucks, let's fish
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 31, 2015 - 03:11 PM
--
work sucks, let's fish
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 31, 2015 - 03:17 PM
--
work sucks, let's fish
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Aug 31, 2015 - 03:27 PM
I've always thought that this type folding system was a great idea for wide boats versus having to use a tilt trailer or disassembling the boat. -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 31, 2015 - 03:30 PM
--
work sucks, let's fish
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 31, 2015 - 03:36 PM
--
work sucks, let's fish
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Aug 31, 2015 - 03:38 PM
needs some simple hardware replaced, have to find plugs for the hulls, find a connecting bolt for the lap spot in back, and im sure she'll float
--
work sucks, let's fish
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Sep 01, 2015 - 11:48 PM
OK, I pretty much figure the cats are a displacement style hull, as I was looking around in a hull preparing to replace hardware, I noticed the floatation foam along the top of the hulls is barely hanging up... how important is this foam really? can it be yanked and forgotten about?
--
work sucks, let's fish
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Sep 02, 2015 - 12:47 AM
DON'T YANK IT!
Hopefully, for your entire life, the foam does NOTHING, except add a bit of weight. It is there in case of dire emergency.
Lets say you forget the drain plug, or you hit a rock & tear the bottom out. Your hull will flood, completely. BUT, that foam will displace an amount of water equal to its volume. Archimedes principle says that buoyancy equals displaced volume of a liquid. If the foam displaces a volume (apps 10lbs/imp gal) equal to the mass of the boat, it will still float, even though the hull is completely flooded.
I can't remember if the standard was for 100% buoyancy, or double,(200%).
Disclaimer...the standards may have been less at daye of build.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Sep 02, 2015 - 12:51 AM
good to know. I'll see if I can figure a way to secure it a little better as its just hanging around
--
work sucks, let's fish
-- -
- Rank: Lubber
- Registered: Aug 30, 2015
- Last visit: Sep 14, 2015
- Posts: 12
Posted: Sep 14, 2015 - 01:26 AM
OK, been looking all over, and I can't find what I'm looking for. a photo or illustration of how the boom is rigged with the 2 pulleys and traveler. any help?
--
work sucks, let's fish
-- -
- Rank: Mate
- Registered: Sep 29, 2012
- Last visit: Jan 10, 2018
- Posts: 441
Posted: Sep 14, 2015 - 01:42 AM
most beachcats are rigged 5:1, 6:1, 7:1 or even 8:1. if there are 2 blocks on the boom, there needs to be a main block single, double or triple near the traveler. Check out the harken website for tips on mainsheet systems
http://www.harken.com/content.aspx?id=3901
HTH
Edited by the-renovator on Sep 14, 2015 - 01:58 AM. -
- Rank: Mate
- Registered: Sep 29, 2012
- Last visit: Jan 10, 2018
- Posts: 441
Posted: Sep 14, 2015 - 01:48 AM
-
- Rank: Mate
- Registered: Sep 29, 2012
- Last visit: Jan 10, 2018
- Posts: 441
Posted: Sep 14, 2015 - 01:58 AM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Sep 14, 2015 - 09:59 AM
Go to www.catsailor.com go to forums put shark in search
They are quite a few in upstate New York
Also try facebook
