Hello everyone,
Just needing some help with the starboard stay/base that pulled out of the hull. Is this a fatal injury or can it be repaired? Any idea on cost either to replace or fix? The rear wing sleeve is leeking a bit on the same hull. I think I have an idea of how to fix the sleeve. Any help would be appreciated.
Thanks,
John
(spacecoast Fl.)
Hobie 17 side stay/base pulled out of hull
-
- Rank: Lubber
- Registered: Apr 10, 2006
- Last visit: Apr 27, 2009
- Posts: 4
Posted: May 06, 2008 - 12:38 PM
-
- Rank: Lubber
- Registered: May 07, 2006
- Last visit: May 07, 2008
- Posts: 1
Posted: May 07, 2008 - 06:13 PM
Is this what you're talking about? http://www.hobiecat.com/community/viewtopic.php?t=9293
If so, you might be able to use a drill and an easy out to remove the rest of the stud.
Good Luck -
- Rank: Lubber
- Registered: Apr 10, 2006
- Last visit: Apr 27, 2009
- Posts: 4
Posted: May 08, 2008 - 10:48 AM
Not quite. That threaded piece and the round bar it is screwed into pulled out of the the hull.
Users on-line
This list is based on users active over the last 60 minutes.