I came across a Cat Trax. It is bent outboard of one wheel, tip sag about 5 inches. I was going to get my super cheater bar, a 6 foot DOM tube and straighten it. It will be mostly but not perfect. We have only used home made dollies so this is a big step up. Will a little bend be a performance issue?
I was thinking of modifying it to be used on an 8 foot and a 10 foot beam boat. I would cut off the bend,, reposition cradle to straight tube. Cut in middle, and put an inner or outer telescoping tube that would be pinned into either position. Out would be stronger and heavier obviously. It may depend on material availability.
Any recommendations?
--
John
Nacra 5.0
CT
--
Cat Trax Repair and Mod?
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Feb 16, 2016 - 06:15 AM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Feb 16, 2016 - 06:20 PM
Sounds like you have a plan, you are going to like using "real" cat trax.
If the tube turns out to be too bad to save it can be replaced, it's just an aluminum pipe. The axle pipe is $75 from the Florida Sailcraft.
http://www.floridasailcraft.com/CatAccesories.htm
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Feb 16, 2016 - 11:57 PM
Thanks for the lead on store bought replacement parts.
--
John
Nacra 5.0
CT
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Posts: 1460
Posted: Feb 17, 2016 - 04:31 PM
ctcataman-
Contact Pete Begel here in the Beachcats.
He had made this mod to his cat tax and used it for years.
He switches between Prindles and a Tornado.
Should work for you.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Feb 17, 2016 - 05:18 PM
Wasn't rocket science, just cut tube in half & put 3' floating tube inside with black marks denoting 8', 8.5', & 10' widths. Pete -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Feb 17, 2016 - 10:03 PM
Pete, That is what I had in mind. I would like to go with some quick lock pins, probably tethered. Will need to see what type is best for a sand environment. What type of pins did you use? John
--
John
Nacra 5.0
CT
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Feb 17, 2016 - 11:50 PM
Something like this would be handy for the pins.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Feb 18, 2016 - 05:06 AM
That would be perfect. I was thinking the ball detent ones would get destroyed on the beach. These would last forever.
--
John
Nacra 5.0
CT
--
Users on-line
This list is based on users active over the last 60 minutes.