https://westernmass.craigslist.org/boa/5475961628.html
--
John
Nacra 5.0
CT
--
Dart in CT
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 07, 2016 - 11:33 AM
-
- Rank: Mate
- Registered: Aug 11, 2010
- Last visit: Mar 19, 2018
- Posts: 424
Posted: Mar 10, 2016 - 07:39 PM
For anyone who's interested in this boat, here's 2 tips.
I understand dart 18 parts are rare in the US, so make
sure the beam/hull attachments are sound. the beams
slide into dedicated holes in the hulls and work with a
spring/clip system to secure/lose them.
Second is the tramp arrangement, its a bit of an "od"
system, where you slide the tramp into the front and
back beams before attaching the second hull.
Just make sur you can tighten the tramp to an acceptable
stiffness, if not.. you need a new tramp
Btw..They are great cats !!
I consider their rudder-setup the best ever made.
Regards, André
Edited by catmodding on Mar 11, 2016 - 02:49 AM.
--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.
Amsterdam, the Netherlands
--
Users on-line
This list is based on users active over the last 60 minutes.