Hi,
The rudder bars on my 5.2 are currently straight and I want to bend them to the correct angle whilst I have them all apart, does anyone know what angle was used on the 5.2 from the factory or have one they can measure please?
Thanks!
Anthony
Nacra 5.2 rudder bar (ackerman) angle?
-
- Rank: Lubber
- Registered: Aug 04, 2013
- Last visit: Aug 09, 2021
- Posts: 48
Posted: May 08, 2016 - 06:11 AM
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: May 08, 2016 - 12:24 PM
I personally wouldn't bother, the gain is not significant. I see cannot tell the difference between my 5.7 (angled), & the 5.0-straight.
However, I do understand that Cat people like to tinker!
Here is a photo of my 5.7 tiller. I don't know the actual angle.
Edited by Edchris177 on May 08, 2016 - 12:26 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Feb 20, 2012
- Last visit: Nov 18, 2017
- Posts: 38
Posted: May 10, 2016 - 03:57 PM
Here ya go:
http://www.swingcat.co.uk/how/bridgedeck/ackermann_steering.pdf -
- Rank: Mate
- Registered: Jan 25, 2004
- Last visit: Apr 06, 2021
- Posts: 267
Posted: May 11, 2016 - 12:03 AM
anthony,
here is a photo of a tiller arm from my 1991 Nacra 5.8. it could be similar to what you want.
caution: i tried to do what you are hoping to do by bending a straight tiller arm using a vice. after (visibly) stressing the outer surface, it cracked the tubing. if you're going to bend the tubing, use a conduit bender like electricians use. just a suggestion.
j
--
Aquacat 12 (sold)...'87 Nacra 5.8 (sold)...'03 Nacra Inter18 (sold)
Venture 15 (sold)....'89 Nacra 5.8 (sold)...'91 Nacra 5.8NA (sold)
'99 Nacra Inter20 (sold)
-- -
- Rank: Mate
- Registered: Apr 22, 2015
- Last visit: May 21, 2023
- Posts: 484
Posted: May 13, 2016 - 10:54 AM
I'm with Ed on the not worth fussing with notion. I suggest you check your rudder alignment before you do anything. If it's dead straight to very slightly toed in (up to 1/8") leave it alone. Here's what I went through.
http://www.thebeachcats.com/index.php?module=forums&func=viewtopic&topic=15766
--
Hobie 16 (3 formerly)
MacGregor 25 (formerly)
Chrysler Dagger 14 (formerly)
NACRA 5.0 (currently)
High Point, NC
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.