I have three Nacra 5.8s used in a camp setting with kids sailing them almost every day of the summer and I am not very well versed in fixing Nacras. I'm having a lot of trouble with the halyards. The part of the mast from which i pull the halyard down to hoist the main is super sharp and keeps shredding our halyards. we have replaced 4 in the past 3 weeks and they are impossible to pull up and get the ring on the hook when the halyard is shredded.
i was thinking of purchasing a Nacra 5.7 halyard with the shackle from Murrays to see if the designated Nacra line is better than what we are using but i dont know if the Nacra 5.7 halyard will fit our 5.8s. Any help would be much appreciated! Halyard line suggestions? Ways to de-sharpen the mast hole? Better ways to raise main?
Thanks,
TBYCats
Troubles with Nacra 5.8s
-
- Rank: Lubber
- Registered: Jul 21, 2016
- Last visit: Jul 21, 2016
- Posts: 2
Posted: Jul 21, 2016 - 07:08 PM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jul 22, 2016 - 08:56 AM
The earlier 5.8s had the halyard coming out of the mast track a few feet up the mast
I never had that issue
Can you take a round file and clean up any spurs that may be there
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.