My 1986 5.8 has a mast rotation problem. Her mast slaps around when her sails are off her and the wind picks up. I replaced the Mast Ball and this didn't help. Should I replace the Shrouds since they have probably stretched? What about adding a Mast Rotation Control bracket? I had one on my 1983 5.2, but my 5.8 is Boom-less.
If I do add a Mast Rotation Control Arm, how should I rig it? Anybody out there have any experience with a Sloppy Mast? I know, this is kind of a personal question, but I just gotta know.
Mast Rotation Control Arm for NACRA 5.8?
-
- Rank: Lubber
- Registered: May 20, 2012
- Last visit: Aug 04, 2016
- Posts: 4
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
If it's flopping about when the sails are off then you don't have enough tension in the rig. Make sure your shrouds are tight, have a friend pull down on a trap wire while you are adjusting each side to get a nice tight rig
But so tight the mast doesn't rotate at all.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Also check the tension on your diamond wires.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Is your 5.8 the same as the 5.7 & 5.0 boomless setups?
They look like this;
The lines are not rigged correctly, it should be an endless line, giving 2:1
I have an extra if you are interested in setting your boat up this way.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Jan 25, 2004
- Last visit: Apr 06, 2021
- Posts: 267
here's what my 5.8 setup looked like. teal colored line was used as a rotator topping lift. this arrangement won't help you induce rotation, just reduce rotation.
j
Edited by arch on Aug 05, 2016 - 02:52 AM.
--
Aquacat 12 (sold)...'87 Nacra 5.8 (sold)...'03 Nacra Inter18 (sold)
Venture 15 (sold)....'89 Nacra 5.8 (sold)...'91 Nacra 5.8NA (sold)
'99 Nacra Inter20 (sold)
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
I don't have firsthand experience with the 5.8. I thought all the boomless models faced the wishbone forward?
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Jul 28, 2014
- Last visit: Jan 12, 2018
- Posts: 13
Here's a picture with the arm pointing forward. This arrangement enables over-rotation of the mast (>90 degrees) when on a broad reach. Also shown is rigging for a 2:1 control line. The block at the trampoline is secured by a short pigtail with a stopper knot below.
--
Kip
NACRA 5.8na
Chesapeake, VA
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
I can't open the link...
Did you right click the image, select "copy image location". Then click the "image" button,(just below where you are typing), then paste your link.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Jul 28, 2014
- Last visit: Jan 12, 2018
- Posts: 13
Here's the image. (I posted originally using my tablet and did not find a "copy image address" option.)
One thing I forgot to mention is that the working end of the control line is secured in a clam cleat attached to the front beam. You can see a portion of the starboard cleat at the right edge of the photo.
--
Kip
NACRA 5.8na
Chesapeake, VA
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.