Scored a cool freebie! And a question
-
- Rank: Lubber
- Registered: Jul 21, 2016
- Last visit: Sep 07, 2019
- Posts: 41
Posted: Sep 08, 2016 - 10:17 PM
I answered an ad in the freebie section for a free catbox. When I showed up to pick it up the guy said "I never cleaned it out, it still has all the boat parts". Score! And it turns out it was even for a P16! My same boat. Here's the question, the jib doesn't have a zipper but has a wire run through the luff with eyes on either end. Is this from an earlier prindle or maybe a different boat? -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Dec 10, 2024
- Posts: 1461
Posted: Sep 09, 2016 - 04:24 PM
You now have a jib from the original P16.
It can be modified to work on your boat, but a sailmaker is required to make the changes.
(Remove the cable, put on a full length zipper luff...)
You might try to sell it as is and use the money to buy a new one for your boat, or something nice for your crew.
There aren't many older versions of that jib still around.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Sep 09, 2016 - 06:21 PM
Or if you find a trashed H-16 around, snag the forestay/jib halyard and replace your 2 piece forestay. Pete -
- Rank: Lubber
- Registered: Jul 21, 2016
- Last visit: Sep 07, 2019
- Posts: 41
Posted: Sep 09, 2016 - 08:28 PM
Wow cool! It seemed like it was older than my current boat. This cat box is just full of goodies lots of spare parts, extra rudder, 5 to 1 harken mainsheet set up. Tons of misc parts. Will the early mainsail work with my 1980s boat?
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.