So I'm looking at my new to me 16 and the Mast Step has popped up. Not a huge deal - I figured this would do it: http://www.thebeachcats.c…pictures?g2_itemId=12223
But the threads to the dolphin striker are stripped out to the point where it runs freely up and down.
The quest is, how important is it to have the striker screwed into the mast step? I'm thinking that I should just buy a new one, but am also toying with just epoxying the step to create new threads.
Thoughts?
--
Chris Lewis
Wilmette, IL
--
Hobie 16 Mast Step repair
-
- Rank: Lubber
- Registered: Mar 15, 2012
- Last visit: Feb 10, 2022
- Posts: 17
Posted: Sep 17, 2016 - 04:54 PM
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Sep 18, 2016 - 01:48 AM
The dophinstriker is the backbone of your boat. I would strongly recommend you just get a new one. If it fails you are likely to fold the boat up in the middle of sailing.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Sep 18, 2016 - 10:03 AM
Agreed. Don't half ass this one or you're likely to regret it. Buy a new step and make sure everything is secure the way it should be.
sm -
- Rank: Lubber
- Registered: Mar 15, 2012
- Last visit: Feb 10, 2022
- Posts: 17
Posted: Sep 18, 2016 - 03:32 PM
Yea, I was figuring this was pretty important, and have the new mast step shipping this week. The mast has a new base, so I was wondering how important the shorter shrouds are - note this is mostly recreational, not a racer.
--
Chris Lewis
Wilmette, IL
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.