Dear all,
What do you guys think about fixing, with rivets, a swivel cam block on an Inter 20 carbon mast to raise the spi? Is, in your opinion, the structure of the mast strong enough to sustain the stress of the sail?
Thanks in advance.
Nacra Inter 20 carbon mast
-
- Rank: Lubber
- Registered: Sep 22, 2014
- Last visit: Oct 20, 2016
- Posts: 4
Posted: Oct 20, 2016 - 11:02 AM
-
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
Posted: Oct 20, 2016 - 11:11 AM
Many owners have done so and it is a nice upgrade for stand up spin sets. Go ahead.
--
Philip
-- -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Nov 30, 2024
- Posts: 797
Posted: Oct 20, 2016 - 05:43 PM
I too contemplated this... At the time the factory was local to me and I had asked the opinion from them... it was not recommended... They were experiencing some issues with the rotator bar with elongating holes and becoming lose, and thought this would put a similar bouncing pressure on the mast creating an identical problem... hence the upgrade to the F-18 style mast base. As per
I changed it over to a system using one of these... it never got jammed up after that
Edited by JohnES on Oct 20, 2016 - 05:46 PM.
--
John Schwartz
Ventura, CA
-- -
- Rank: Lubber
- Registered: Apr 28, 2014
- Last visit: Aug 18, 2023
- Posts: 91
Posted: Oct 22, 2016 - 08:22 AM
If you have a Nacra Inter with a carbon mast and are experiencing elongated holes on the rotator, or even if you haven't yet....
Highly recommend getting get one of these.
http://www.murrays.com/56-6821.html
--
Steve
Nacra Inter 20
Okemos Michigan
--
