hi all,
i was able to separate both hulls from the beams and now i have the hulls in my garage.
I hear cluncs from both hulls when i flip and roll the hulls.
Can i suspect any styrofoam blocks inside that cause this sound?
If so, is it common? What can i do about it?
//Mats
clunc from my hobie 17 hulls
-
- Rank: Lubber
- Registered: Aug 22, 2016
- Last visit: Jul 03, 2017
- Posts: 17
Posted: Jan 09, 2017 - 09:54 AM
-
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Jan 09, 2017 - 11:24 AM
It is likely the foam blocks inside the hull. They are located behind the centerboard trunks and are there to keep your boat afloat in case you get a hole in the hull.
You could also be hearing the centerboards banging around inside the wells. Either way, it is not a concern.
sm
Edited by Dogboy on Jan 09, 2017 - 11:24 AM. -
- Rank: Lubber
- Registered: Aug 22, 2016
- Last visit: Jul 03, 2017
- Posts: 17
Posted: Jan 12, 2017 - 06:33 AM
Thanks Dogboy!
I'll leave it and proceed with other stuff
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.