Anyone have info or photos of what these look like? The bridle eyelets have moved up a millimeter or so, in its 19 years of use. I came up empty on numerous Internet searches. If I was to guess they are individual cylindrical anchors but short of x-Ray I don't know how to verify this.
--
John
Nacra 5.0
CT
--
Wave Bridle Anchors
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Feb 03, 2017 - 08:46 PM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Feb 05, 2017 - 08:30 AM
matt miller at the hobie forums will have that answer for sure (and any hobie question you could ever think of) -
- Rank: Mate
- Registered: Aug 11, 2010
- Last visit: Mar 19, 2018
- Posts: 424
Posted: Feb 05, 2017 - 09:40 AM
Is this question about the H or the T ??
A
--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.
Amsterdam, the Netherlands
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Feb 05, 2017 - 01:36 PM
Hi Andre,
This is for the new Wave. We replaced the same anchors on the Tornado last year.
John
--
John
Nacra 5.0
CT
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 16, 2017 - 05:36 AM
Apparently Hobie used some aluminum anchors on early models. The corrosion makes them expand, and pushes the plastic out. They made a strap repair kit for a while but no more. Easy DIY project. Surprisingly hard to find info on this.
--
John
Nacra 5.0
CT
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 16, 2017 - 05:36 AM
Apparently Hobie used some aluminum anchors on early models. The corrosion makes them expand, and pushes the plastic out. They made a strap repair kit for a while but no more. Easy DIY project. Surprisingly hard to find info on this.
--
John
Nacra 5.0
CT
--
