Welcome anonymous guest

Please Support
TheBeachcats.com

Hawaiian Righting System  Bottom

  • I need to replace the return shock cord on the Hawaiian style of righting system that I have on my H16 and would like some suggestions about what size shock cord should be used. The cord that is currently installed seems a bit small and needs to be replaced. Thanks for any suggestions.

    --
    Marty
    1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
    Opelika, Al / Lake Martin
    --
  • 1/4" minimum, 3/8" if it will run in the blocks involved.

    --
    Sheet In!
    Bob
    _/)_____/)_/)____/)____/)_____/)/)__________/)__
    Prindle 18-2 #244 "Wakizashi"
    Prindle 16 #3690 "Pegasus" Sold (sigh)
    AZ Multihull Fleet 42 member
    (Way) Past Commodore of Prindle Fleet 14
    Arizona, USA
    --
  • Thank you. I think the one I have is 1/4" because it looks very thin. I discovered that at the rear block it had frayed and is barely hanging on by a couple of rubber bands. I think I would go with the thicker stuff for sure.

    --
    Marty
    1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
    Opelika, Al / Lake Martin
    --
  • Look for Marine Grade bungee.
    It will last longer than the cheap imported stuff.

    --
    Sheet In!
    Bob
    _/)_____/)_/)____/)____/)_____/)/)__________/)__
    Prindle 18-2 #244 "Wakizashi"
    Prindle 16 #3690 "Pegasus" Sold (sigh)
    AZ Multihull Fleet 42 member
    (Way) Past Commodore of Prindle Fleet 14
    Arizona, USA
    --
  • Thanks, I will keep that in mind.

    --
    Marty
    1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
    Opelika, Al / Lake Martin
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options
  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.