I'm in the middle of repairs to my F18 trampoline ,have question and cannot find information on literature on what "Proper Size Make or Length"]of Lacing I need to re-lace trampoline to hulls and back transit beam ?
Could someone help me out .
I've contacted Nacra headquarter with the same question ,however they took the time to reply only to put me of to USA Nacra Distributors but no reply from them ????Hmm poor customer service ????
So I'm reaching out to all of you
I come from a small sailing community off lake huron not to many Nacra's around Here !!!!!
Cheers and Thxs
2007 Nacra Infusion F18
-
- Rank: Lubber
- Registered: Feb 04, 2013
- Last visit: Apr 18, 2017
- Posts: 3
-
- Rank: Mate
- Registered: Apr 15, 2005
- Last visit: Feb 21, 2024
- Posts: 574
http://www.nacra17class.com/rigging-part-list/
This isn't exact for the Nacra F18 but its very close, as are the rest of their line lengths. I don't believe Nacra has the equivalent chart published for the Infusion, unfortunately.
I would also just give Rick Bliss over at New England Catamarans a call, he is the best in the business and Nacra are lucky to have him! -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
sunsetcove, Welcome to TheBeachcats.com!
I hear Lake Huron my teeth start to chatter, well done. When does beachcat sailing season start? Do you travel or mainly sail locally?
Please tell us a little about yourself and your sailing area. Instructions for adding an avatar and signature to your posts are in my signature below.
Here is a link to some good pictures of a rigged Infusion, maybe something you can use.
http://www.thebeachcats.c…pictures?g2_itemId=18493
I agree with giving a dealer a call, if you can't get Rick on the phone call Charlie Trinque at Key Sailing (877) 932-7272 in Pensacola, Florida. They also sell and support all Nacra models.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Lubber
- Registered: Apr 01, 2016
- Last visit: Apr 12, 2022
- Posts: 41
Hi Robert,
I apologize for not answering via email. I've been traveling the last 3 weeks for events and you caught me right at the start of a very busy travel schedule.
The stock rear tramp lacing is a polyester double braid with dyneema core, 3mm x 20'. You can also just use 3mm 12 strand dyneema (that's what I use).
Regards,
Todd Riccardi
Nacra North America -
- Rank: Lubber
- Registered: Feb 04, 2013
- Last visit: Apr 18, 2017
- Posts: 3
Hey thanks everyone
And Todd thanks for getting back to me !!
And to Damon Linkous
1992 Hobie 18
Memphis, TN
Thanks too !
Season here starts end of May usually like to get feet wet on the long weekend !
Mainly local sailing off beach ..
Here is a youtube Vid of us Nacra F18 Canada
https://www.youtube.com/watch?v=rzclMMB8WzY
Have a look see !
This was one year to the date after the seams had separated and split 2 1/2 ft
The repair was costly but worth it !!
this off shore wind was Awesome !!!!!