Prindle 16 Race - adding a spinnaker with snuffer, new jib etc for reggata

kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: Mar 30, 2017 - 07:26 PM

Hi all,

I'm upgrading my Prindle 16 for reggata (races with texel, yardstick).
I added a snuffer system with spinaker (17m2). On weekend I will add photos with sail. I also change a jib - it is much lower (attached to spi pole) and jib sheets will be at front crossbar to better trim.
I added an album in technical tips but here you have a few photos also - maybe for somebody it will be helpful!

--
Kuba,

1980 Prindle 16
Hobie Wave
--
wanderoo222

Rank: Lubber

Registered: Nov 06, 2016

Last visit: Feb 01, 2018

Posts: 43
Posted: Mar 30, 2017 - 07:33 PM

Nice looking boat, enjoy

--
2016 Hobie Getaway
1978 Nacra 5.2
1978 Hobie 16 (back in the day)
--
Jonathan

Rank: Lubber

Registered: Apr 24, 2002

Last visit: Sep 30, 2021

Posts: 23
Posted: Mar 30, 2017 - 08:07 PM

I really like the black crossbars and mast!

Jonathan
martyr

Rank: Mate

Registered: Jul 01, 2016

Last visit: Aug 30, 2023

Posts: 631
Posted: Mar 31, 2017 - 09:07 AM

Very nice Prindle!

--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
--
kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: Mar 31, 2017 - 06:07 PM

Thanks guys!! Unfortunatelly sails didn't arrived today so I will do some photos next week with spinnaker end new jib.

--
Kuba,

1980 Prindle 16
Hobie Wave
--
pbegle

Rank: Mate

Registered: Mar 12, 2003

Last visit: Feb 19, 2021

Posts: 879
Posted: Mar 31, 2017 - 06:19 PM

Who made Spinnaker & snuffer ? Pete
kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: Apr 01, 2017 - 06:57 AM

Spi pole (3,05 m) is from windsurfing mast, ring and snuffer bag is from nacra f18 (2,5m long). Sail is from polish sailmaker Bryt Sails. They do a lot of sails also for A-Cat.

--
Kuba,

1980 Prindle 16
Hobie Wave
--
kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: Apr 06, 2017 - 03:12 PM

So here is the spinaker (it is flat because of no wind that day)

--
Kuba,

1980 Prindle 16
Hobie Wave
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Apr 06, 2017 - 03:32 PM

I think you put your sail on sideways
kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: Apr 11, 2017 - 06:13 AM

Here are jibs:

Edited by kuba730 on Apr 11, 2017 - 06:15 AM.

--
Kuba,

1980 Prindle 16
Hobie Wave
--
kornel

Rank: Lubber

Registered: Aug 23, 2014

Last visit: Apr 24, 2017

Posts: 2
Posted: Apr 24, 2017 - 06:28 AM

nice job ! :)
see you in Goczałkowice
martyr

Rank: Mate

Registered: Jul 01, 2016

Last visit: Aug 30, 2023

Posts: 631
Posted: Apr 24, 2017 - 07:38 AM

And now for something completely different...
I just realized that this boat is white. In the first pic it looks like baby blue, I guess it was in a shadow or something.

--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
--
kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: Apr 24, 2017 - 04:36 PM

kornelnice job ! :)
see you in Goczałkowice

Thx Kornel!! :) Maybe we will be racing without snow ;)

martyrAnd now for something completely different...
I just realized that this boat is white. In the first pic it looks like baby blue, I guess it was in a shadow or something.

Boat is white :) Probably shadow

--
Kuba,

1980 Prindle 16
Hobie Wave
--
catmodding

Rank: Mate

Registered: Aug 11, 2010

Last visit: Mar 19, 2018

Posts: 424
Posted: Apr 24, 2017 - 07:22 PM

Isn't a spi on a P16 mast something the cat is not build for?
Like the Dart 18 it has no spreaders, diamond wires whatsoever.
Have seen Dart 18 masts break with a spi up and driven hard.

A

--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.

Amsterdam, the Netherlands
--
kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: May 02, 2017 - 03:52 AM

https://vimeo.com/215618460

Edited by kuba730 on May 02, 2017 - 12:42 PM.

--
Kuba,

1980 Prindle 16
Hobie Wave
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: May 02, 2017 - 09:40 AM

QuoteIsn't a spi on a P16 mast something the cat is not build for?

you are correct - this cat was not designed with a spin in mind -
but these are very robust cats and probably can withstand the tension and torsion that is going on
don't forget the h16 has a spin kit - and i say a prindle is at least as robust as a hobie, if not more... (prindles dont seem to be as prone to soft hulls as hobies from what i can tell)

the mast on the other hand is very susceptible to failure from these forces
the cycling alone (when gybing repeatedly) is probably the worst part of it .... and i would think the more you use it, the more likely you are to killing your mast. But the mast can be replaced pretty easy and the mast is about the same cost as the spin set up itself -

so as long as you can "stomach" the risk and costs- enjoy
catmodding

Rank: Mate

Registered: Aug 11, 2010

Last visit: Mar 19, 2018

Posts: 424
Posted: May 02, 2017 - 05:30 PM

kuba730https://vimeo.com/215618460Edited by kuba730 on May 02, 2017 - 12:42 PM.

Nice one, good vid. Now show me one with the spi up ..
One advise, you need a line/shockcord from the rear beam
to prevent you from falling forward while trapezing.
There's a threat about this here at the BC.

A

--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.

Amsterdam, the Netherlands
--
pbegle

Rank: Mate

Registered: Mar 12, 2003

Last visit: Feb 19, 2021

Posts: 879
Posted: May 02, 2017 - 05:49 PM

Or footloops (10") on the gunwale by drilling thru the lip. I use 4 on each side. Pete
kuba730

Rank: Lubber

Registered: Aug 11, 2016

Last visit: May 11, 2017

Posts: 16
Posted: May 11, 2017 - 07:41 PM

catmodding
kuba730https://vimeo.com/215618460Edited by kuba730 on May 02, 2017 - 12:42 PM.

Nice one, good vid. Now show me one with the spi up ..
One advise, you need a line/shockcord from the rear beam
to prevent you from falling forward while trapezing.
There's a threat about this here at the BC.

A

Thanks! Here you are some short vid with spi from regatta:)
https://vimeo.com/217091498
And here is a galery from reggata you can see it with spi up:
http://katamarany-poludnie.pl/foty/

--
Kuba,

1980 Prindle 16
Hobie Wave
--