• HULLFLYER
  
  

  • Rank: Mate
  • Registered: Aug 06, 2004
  • Last visit: Oct 20, 2024
  • Posts: 878

  Posted: Apr 19, 2017 - 10:17 AM

  Hydroturf or Seadek

  • 
  •  
• samc99us
  
  

  • Rank: Mate
  • Registered: Apr 15, 2005
  • Last visit: Feb 21, 2024
  • Posts: 574

  Posted: Apr 19, 2017 - 11:46 AM

  I used the stuff Falcon Marine sells, which worked out pretty well. You want the stuff with a 3M adhesive already on the decking.
  
  Raptordeck looks like a good alternative, they may have a kit that fits your boat which will save a ton of time: http://www.raptordeck.com/
  
  I'd go for the diamond plate look and in black, which doesn't stain as easily as the other colors.

  • 
  •  
• saltlife77
  
  

  • Rank: Mate
  • Registered: Feb 10, 2016
  • Last visit: Jun 08, 2024
  • Posts: 197

  Posted: Apr 19, 2017 - 06:38 PM

  Quote

  I used the stuff Falcon Marine sells

  
  I have been looking into adding some non skid too. What does Falcon Marine sell. I was considering the Hydroturf because I have heard good things about it.
  
  --
  Pete
  2001 NACRA 450 SOLD
  2000 NACRA 500 TOTAL LOSS
  2004 NACRA INTER 20 SOLD
  2016 NACRA 500 Sport
  DeLand, FL
  --

  • 
  •  
• nacrasailing
  
  

  • Rank: Lubber
  • Registered: Apr 01, 2016
  • Last visit: Apr 12, 2022
  • Posts: 41

  Posted: Apr 19, 2017 - 07:10 PM

  We sell kits for modern Nacras for around $150, don't underestimate the time it takes to cut into a pattern and bevel the edge!
  But for any other boat you can buy a sheet for around $100 ($30 to add Pressure Sensitive Adhesive PSA), in the past when I priced anything else it was much more expensive.
  http://hydroturf.com/products/Sheets_of_Hydro-Turf/PWC___Boating

  • 
  •  
• saltlife77
  
  

  • Rank: Mate
  • Registered: Feb 10, 2016
  • Last visit: Jun 08, 2024
  • Posts: 197

  Posted: Apr 19, 2017 - 08:07 PM

  Quote

  We sell kits for modern Nacras for around $150, don't underestimate the time it takes to cut into a pattern and bevel the edge!

  
  So for around $150 it would be shipped to me cut to fit a 2001 NACRA 450?
  
  --
  Pete
  2001 NACRA 450 SOLD
  2000 NACRA 500 TOTAL LOSS
  2004 NACRA INTER 20 SOLD
  2016 NACRA 500 Sport
  DeLand, FL
  --

  • 
  •  
• tominpa
  
  

  • Rank: Mate
  • Registered: Jul 29, 2015
  • Last visit: Jul 26, 2024
  • Posts: 590

  Posted: Apr 19, 2017 - 09:10 PM

  nacrasailing

  We sell kits for modern Nacras for around $150, don't underestimate the time it takes to cut into a pattern and bevel the edge!
  But for any other boat you can buy a sheet for around $100 ($30 to add Pressure Sensitive Adhesive PSA), in the past when I priced anything else it was much more expensive.
  http://hydroturf.com/products/Sheets_of_Hydro-Turf/PWC___Boating

  
  
  I'm tempted to purchase a kit for a NACRA 570 and make some manual adjustments to adapt it to my old 5.7. How do you put in an order for a precut 570?
  
  --
  Tom
  NACRA 5.7 (1984 Sail 181)
  Pennsylvania
  --

  • 
  •  
• bacho
  
  

  • Rank: Mate
  • Registered: Jun 17, 2011
  • Last visit: Sep 24, 2023
  • Posts: 783

  Posted: Apr 20, 2017 - 01:27 AM

  HULLFLYER

  Hydroturf or Seadek

  
  
  They are about the same IMO.
  
  I am a hydroturf dealer and can offer a small discount from their online pricing.
  
  --
  Greenville SC
  
  Offering sails and other go fast parts for A-class catamarans
  --

  • 
  •  
• HULLFLYER
  
  

  • Rank: Mate
  • Registered: Aug 06, 2004
  • Last visit: Oct 20, 2024
  • Posts: 878

  Posted: Apr 20, 2017 - 06:46 AM

  Would you have a pre cut kit for a 2005 Nacra f18
  The 2005 has different size dagger boards
  They are approx 9 inches wide instead of 8 inches like most Nacrasi

  • 
  •  
•  
•  

Users on-line

• 0 users

This list is based on users active over the last 60 minutes.