I think the title pretty much says it. My spreader tube is pretty worn where it passes through the mast. It appears to be .75 o.d. with .125 wall. Does anybody have a good source for appropriate replacement material? Thanks.
Steve Zicree
Need new spreader tube for Nacra 5.0
-
- Rank: Lubber
- Registered: May 02, 2017
- Last visit: Aug 06, 2017
- Posts: 13
Posted: May 26, 2017 - 01:19 PM
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: May 27, 2017 - 12:16 AM
Let me dig through my junk bin tomorrow. I had one, off an old 5.2, it was in good shape. I think they are the same.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: May 02, 2017
- Last visit: Aug 06, 2017
- Posts: 13
Posted: May 27, 2017 - 12:43 AM
Ed,
Awesome. Thanks.
Steve -
- Rank: Lubber
- Registered: May 01, 2017
- Last visit: Jul 06, 2020
- Posts: 43
Posted: May 27, 2017 - 08:25 AM
Key Sailing is a Nacra dealer -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jun 03, 2017 - 01:46 PM
Sorry for the delay, I forgot about it, then was out of country a few days working. I dug it up, bad news, I cut a piece off as it was the perfect size/strength to use as an insert in the thin tube of the H18 Magnum wings, although where it passes through the mast is in near perfect condition!
It is 3/4" OD, & 1/8" wall thickness.
A place like Metal Supermarkets or McMaster Carr has it. You want the 6061 round tubing.
https://www.mcmaster.com/…m-hollow-tubing/=17wsm9r
You would need to cut the end groves & drill the two cotter pin holes.
Have you tried giving Dan Berger, or Pete Begle, (they have ads here) a call?
They may well have a bent mast & could pull a decent one for you.
Edited by Edchris177 on Jun 03, 2017 - 01:54 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Nov 19, 2015
- Last visit: Oct 22, 2024
- Posts: 398
Posted: Jun 03, 2017 - 02:17 PM
You could probably get a piece that would work from a metal yard basically for free. Even if it was solid round bar it would still work and weigh near nothing. It's just a little more material to drill and notch. -
- Rank: Lubber
- Registered: May 02, 2017
- Last visit: Aug 06, 2017
- Posts: 13
Posted: Jun 03, 2017 - 07:02 PM
Guys,
I appreciate the help. I've actually got a piece of 6061-t6 of the same dimensions, I just had dreams of finding an anodized or otherwise coated one.
Steve Zicree -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jun 05, 2017 - 07:03 AM
I would replace it with the newer version
one with adjustable spreaders
I think I have a couple lying around
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.