Am I Safe or Sorry? (Damaged Hobie Tiger mast)

jakob5_10

Rank: Lubber

Registered: May 30, 2017

Last visit: Jun 01, 2017

Posts: 3
Posted: May 30, 2017 - 04:49 PM

My mast fell of and landed on a cleat and got a dent!
How overbuild is a tiger mast ? can I continue to use it ? If it break how is it most likely to happen ?

Still waiting for the insurance company to come with a verdict an my gut tells me that it is safe to use and not wanting to loose to many sailing days I will properly continue using it!! Is that Stupid ??

--
Latest outing
https://youtu.be/wibsiTWOaj4
--
chump23

Rank: Mate

Registered: Oct 05, 2015

Last visit: Jul 17, 2018

Posts: 123
Posted: May 30, 2017 - 04:59 PM

That doesn't look like a big deal to me, but don't listen to me... I don't know anything,

--
Hobie Getaway
Prindle 18 - Sold
South Padre Island, TX
--
Dogboy

Rank: Mate

Registered: Mar 19, 2004

Last visit: Nov 21, 2024

Posts: 964
Posted: May 30, 2017 - 06:31 PM

If it were up higher on the mast where there is a lot of bending load, it would definitely be a concern. But down low on the mast where the load is primarily compression, I think it is probably much less of an issue. Still not good though. The failure mode would likely be the mast buckling around the dent.

Did you have your mast step pin in when it fell?

sm
PIRATE39

Rank: Mate

Registered: Jul 26, 2008

Last visit: Jan 15, 2018

Posts: 101
Posted: May 30, 2017 - 10:48 PM

That mast ill be fine . Damage is to low to make it unsafe .. Sail fast

--
Doug Klem
Pensacola , Fl.
Blade F16
Prindle 18-2 w/spin
Prindle 18-2 x 3
Prindle 19 MX
--
samc99us

Rank: Mate

Registered: Apr 15, 2005

Last visit: Feb 21, 2024

Posts: 574
Posted: May 31, 2017 - 08:59 AM

You should get a replacement tube, but that stick is totally fine to sail on. An Infusion sailed Nationals with compression damage higher up on the tube that was worse and didn't have any issues.
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: May 31, 2017 - 09:48 AM

It's so low it would be pretty easy to take off the base and sleeve it
that's what i would do - and use the insurance money to buy lots of rum
bruiser

Rank: Lubber

Registered: Jul 03, 2013

Last visit: Jul 13, 2022

Posts: 52
Posted: May 31, 2017 - 10:20 AM

That looks like one of my good masts. So definitely a keeper for me. I have dents high up on a mast and have had no issue there either. Where that is located I think it is totally a non-issue. I have had 2 mast failures, never one from a dent.
samc99us

Rank: Mate

Registered: Apr 15, 2005

Last visit: Feb 21, 2024

Posts: 574
Posted: May 31, 2017 - 04:08 PM

Bruiser, what rigs? There are vast differences in loads between a Hobie 14 rig and an aluminum F18 rig.

MN3, that approach I do tend to agree with, you can probably get in there and have an autobody shop pull it back to level and sleeve internally. At the same time, now is a good time to upgrade to a modern rig, which the Hobie Tiger will benefit from drastically. Either an Infusion rig or a Cirrus rig (Exploder and Falcon use the same extrusion as the Cirrus rig, the Wildcat may as well) will work very nicely. You will need a new main but that doesn't have to happen with the mast if insurance won't pony up. I'm not even sure you can find a Tiger stick anymore but I'm not the Hobie expert.
jakob5_10

Rank: Lubber

Registered: May 30, 2017

Last visit: Jun 01, 2017

Posts: 3
Posted: May 31, 2017 - 04:51 PM

The insurance company has ordered a new mast, and is paying for a new cleat and the repair of my main. So thumbs up to them for that

I will keep the old mast as a spare, in case something drastic happens to the new one!

I have thought of upgrading to a new one, but the boat is not being used for racing, so durabilitet and simplecity is important

--
Latest outing
https://youtu.be/wibsiTWOaj4
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Jun 01, 2017 - 08:15 AM

QuoteThe insurance company has ordered a new mast, and is paying for a new cleat and the repair of my main. So thumbs up to them for that

sweeet!
don't omit the rum!

what company do you use?
klozhald

Rank: Chief

Registered: Apr 19, 2011

Last visit: Nov 20, 2024

Posts: 1460
Posted: Jun 01, 2017 - 11:29 AM

[quoteMN3what company do you use?[/quote]
I'm interested as well.

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
jakob5_10

Rank: Lubber

Registered: May 30, 2017

Last visit: Jun 01, 2017

Posts: 3
Posted: Jun 01, 2017 - 03:26 PM

Thank you very much for all your input!

Regarding the name of the insurance company I am pretty much sure that you need a danish social security number, and a danish adresses, plus a danish boat!!

--
Latest outing
https://youtu.be/wibsiTWOaj4
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Jun 01, 2017 - 03:46 PM

QuoteRegarding the name of the insurance company I am pretty much sure that you need a danish social security number, and a danish adresses, plus a danish boat!!

That is discriminatory ! :)