I found a better mast step on Ebay and bought it, it looks good, but the holes don't line up with my cross bars. Drill new holes in the cross bar, or live and learn and buy a new step from Murrays?
What size rivets should I be using?
Edited by kgatesman on Jun 24, 2017 - 12:09 PM.
Prindle 18 Mast Step Installation
-
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Jun 24, 2017 - 12:08 PM
-
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Nov 30, 2024
- Posts: 797
Posted: Jun 24, 2017 - 04:13 PM
One picture = 1000 words.... can we see the one you got?
--
John Schwartz
Ventura, CA
-- -
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Jun 25, 2017 - 07:16 AM
Here is the old and new to me steps. https://www.thebeachcats.com/pictures?g2_itemId=128068
Edited by kgatesman on Jun 25, 2017 - 07:49 AM. -
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Jun 25, 2017 - 07:51 AM
When you put the dolphin striker rod in and drop it onto the bar, the new step fits the cross bar perfectly (the curve) however the four rivet holes are out of alignment, by a good amount. If I drill out the holes, they will all be out of round and I wonder if the rivet will even hold. Oh the new part looks good, but it's just not right. -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Nov 30, 2024
- Posts: 797
Posted: Jun 25, 2017 - 12:33 PM
Just drill some new holes in both the base and the beam and rivet those in place...
Or get one from Murray's that doesn't predrilled holes and start fresh
Edited by JohnES on Jun 25, 2017 - 12:35 PM.
--
John Schwartz
Ventura, CA
-- -
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Jun 25, 2017 - 03:36 PM
What size rivets? Thanks!! -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Nov 30, 2024
- Posts: 797
Posted: Jun 25, 2017 - 07:14 PM
The answer is here
https://www.murrays.com/product/56-2006/
--
John Schwartz
Ventura, CA
-- -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jun 30, 2017 - 01:08 AM
3/16 monel rivets chances were not likely that they would have lined up either way id just drill in a new spot with fresh hole a little away from old holes
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
