Hi guys, purchased a Prindle 18-2 last year and ended up rebuilding the thing.
Looks good, but never had a Jib on it, so looking for one.
Came on one from a Nacra 5.8 and he gave me all the lengths on it, but can't find any references to the Prindle 18-2 to compare them to.
I know the mast on the 18-2 is the same as the Prindle 18, so do they also share the same Jib as well?
Thanks for any help!
Nacra 5.8 jib fit a Prindle 18-2?
-
- Rank: Lubber
- Registered: Aug 10, 2017
- Last visit: Aug 18, 2017
- Posts: 3
Posted: Aug 10, 2017 - 10:09 PM
-
- Rank: Mate
- Registered: Sep 16, 2016
- Last visit: Sep 10, 2021
- Posts: 274
Posted: Aug 11, 2017 - 02:23 PM
It's 10% larger on the 18-2. Can't comment on the cut, but you can look that up at the sailmakers.
Not that big a difference, right? I sail both boats and I greatly prefer the 18-2 jib.
https://www.thebeachcats.…183&g2_imageViewsIndex=1
--
Prindle 18
96734
-- -
- Rank: Lubber
- Registered: Aug 10, 2017
- Last visit: Aug 18, 2017
- Posts: 3
Posted: Aug 12, 2017 - 08:29 PM
Thanks! lot's of good information in that link.
So, a Prindle 18-2 is a different size jib than a Prindle 18, got it!
Now, is there any sail makers sites that I could look up the actual sizes of different sails for a particular cat?
Like which other cat's jib could be effectively used on the 18-2 if I can't locate a used one?
I've asked for quotes for one, but haven't received them yet. -
- Rank: Mate
- Registered: Apr 15, 2004
- Last visit: Jan 13, 2023
- Posts: 358
Posted: Aug 12, 2017 - 08:37 PM
Side note....on the chart the square footage for the 18 main looked odd. Didn't seem to follow the trend in converting from sq-m. It should be about 170.
--
Tim
Collierville (Memphis), TN
Supercat 15--sold :(
Hobie monocat--given
Vanguard 15--traded for...
Nacra 4.5--sold
Nacra 5.7
Hobie 14–sold to make room for...
Supercat 17–sold
-- -
- Rank: Mate
- Registered: Sep 16, 2016
- Last visit: Sep 10, 2021
- Posts: 274
Posted: Aug 16, 2017 - 03:21 AM
That's close.
So- side note: can I run the 18-2 square-top up my 18's mast? Implications? Anyone done it?
--
Prindle 18
96734
-- -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Aug 16, 2017 - 06:27 AM
The nacra 5.8 is a 19 foot boat, the mast is taller the jib will not work on a 18/2 if the nacra 5,8 is a NA 5.8 the jib is huge. Neither will work on an 18/2 -
- Rank: Lubber
- Registered: Aug 10, 2017
- Last visit: Aug 18, 2017
- Posts: 3
Posted: Aug 18, 2017 - 09:48 PM
Thanks Hullflyer! -
- Rank: Mate
- Registered: Sep 16, 2016
- Last visit: Sep 10, 2021
- Posts: 274
Posted: Aug 18, 2017 - 11:32 PM
Anyone want to talk me out of it before Sunday?
--
Prindle 18
96734
-- -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Aug 19, 2017 - 05:44 AM
Both the 18 and 18/2 came with pin head sails. I see no reason you can not use the square top as both 18 amd 18/2 use the same mast -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Dec 10, 2024
- Posts: 1461
Posted: Aug 20, 2017 - 06:43 PM
Here's a quick look:
https://www.thebeachcats.…39f8b65a284c57678254274c
There is lots of data in this album about the 18-2.
Bob
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Sep 16, 2016
- Last visit: Sep 10, 2021
- Posts: 274
Posted: Aug 26, 2017 - 12:24 AM
You shoulda talked me out of it... Wasn't that great.
The first tack felt good in moderate 12-15mph but it felt sluggish after that. On the 18-2 it is anything but.
Observations:
The square top was slightly shorter and about a foot and a half wider so I had to use the longer boom from the 18.2. It went up smoothly, but was harder to hook in with all that material at the top.
With the boom extending farther aft of the tiller, the net effect was more trouble sheeting hard with the traveler centered. When you traveled out, things lined up better and there seemed like the sail generated more power and you could pull the tack lower. It worked well with the smaller P18 jib. The boat seemed to point higher, but was not faster on a reach, as I expected.
Downwind, the square top was a much nicer profile and the battens performed better.
All, in all, it was very stable with the extra top area, on all tacks and wind speeds. Flying the hull was not any trickier but getting her up there was harder. Fun - but not the kick in the pants I had hoped for.
--
Prindle 18
96734
--
Users on-line
This list is based on users active over the last 60 minutes.