I am wondering if the rings with that "pigtail" thing in the center are easier to use than just a regular old split ring? Does anyone use that type of ring, and are they reliable like a traditional split ring?
--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
--
Clevis Pins and Split Rings???
-
- Rank: Mate
- Registered: Jul 01, 2016
- Last visit: Aug 30, 2023
- Posts: 631
Posted: Dec 01, 2017 - 11:37 AM
-
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Dec 01, 2017 - 12:50 PM
Same reliability for either, albeit poor unless you tape over them so they do not catch on lines and fabric. The inner pigtail does aid in getting the ring on the pin.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Jul 01, 2016
- Last visit: Aug 30, 2023
- Posts: 631
Posted: Dec 01, 2017 - 06:33 PM
Okay thanks. I am thinking of switching out all the split rings with something easier to use and thought I'd try the pigtail rings.
--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
-- -
- Rank: Mate
- Registered: Jul 01, 2016
- Last visit: Aug 30, 2023
- Posts: 631
Posted: Dec 02, 2017 - 05:28 AM
Just curious, what is the easiest to use, but reliable and not going to disengage when it comes to things, to keep pins in place with no worries? I've never had a split ring fail or back out of a pin, but they are a pain in the butt, now that I'm older anyway, so just looking for an alternative solution that is easier on the fingers and fingernails.
Edited by martyr on Dec 02, 2017 - 05:30 AM.
--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Dec 04, 2017 - 07:02 PM
These are easiest:
https://www.murrays.com/product/22-9491/
Just remember to keep them covered with something, as these pigtail rings do not rotate freely around like the others. Use good tape (self-amalgamating) or a shroud cover to protect them.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Sep 16, 2016
- Last visit: Sep 10, 2021
- Posts: 274
Posted: Dec 05, 2017 - 04:58 PM
Marty, I second your second-guessing the use of these EZ rings. The ones I've purchased are softer than a similar closed ring, and can be deformed easily by shroud covers, jib flogging and trap line acrobatics. Even if taped in place, I don't trust them anymore for standing rigging. I'm just not that lucky a guy.
It's really about what you are comfortable with, not us, but if you try using a small staple puller or a cheap ringding plier, you may find that closed cotter rings become less of a PIA.
--
Prindle 18
96734
-- -
- Rank: Mate
- Registered: Jul 01, 2016
- Last visit: Aug 30, 2023
- Posts: 631
Posted: Dec 05, 2017 - 08:18 PM
I didn't know that such pliers existed. Thanks for the advice and thanks to all for the responses.
--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Dec 06, 2017 - 12:05 PM
Whaaaaaaat?
Where have those pliers been all my life?
I searched the net for them and most are small- intended for beading or jewelry making.
The opening they create is also small.
The Xuron brand looks beefiest, and seems to open the ring well.
$15.
Nohuhu, what brand do you use for sailboat size ring dings? Is it worth keeping track of yet another pair of pliers?
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Sep 16, 2016
- Last visit: Sep 10, 2021
- Posts: 274
Posted: Dec 06, 2017 - 09:57 PM
I've been using the staple pullers, which work well, but they are not usually stainless and are awkward to pack in a dry bag.
There are dozen brands of split ring tools. Most made for working with fishing tackle, some for jewelers. Rapala's mini pliers may be the right thing for our singular purpose. Was looking for something under 5," with a sheath. Most are longer and made of stainless or alum.
https://www.amazon.com/Ra…ywords=split+ring+pliers
Some are pretty fancy.
There's even one folding multi-tool with the slip-ring function
https://www.amazon.com/Bo…lit%2Bring%2Bpliers&th=1
--
Prindle 18
96734
-- -
- Rank: Mate
- Registered: Jul 01, 2016
- Last visit: Aug 30, 2023
- Posts: 631
Posted: Dec 07, 2017 - 10:03 AM
I've got a pair of Rapala pliers that are long needle nose type and have a beak-like end just like those Xuron pliers. I found them once when I was fishing and kept them and never knew what they would be used for, but I'll bet they will work for opening split rings!!!
--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
-- -
- Rank: Mate
- Registered: Aug 18, 2003
- Last visit: Dec 13, 2023
- Posts: 880
Posted: Dec 08, 2017 - 06:04 AM
Replacing as many as possible of these rings with quick pins, snap shackles, etc., is good investment. I did on main and sheet blocks and other places. Will not change on shrouds and stay adjusters and rudder pins, i think that's pretty much it. I tried spring clips for rudder pins but didn't work well and don't trust them anymore. These work fine:
Edited by Andinista on Dec 08, 2017 - 06:05 AM. -
- Rank: Mate
- Registered: Sep 16, 2016
- Last visit: Sep 10, 2021
- Posts: 274
Posted: Dec 08, 2017 - 06:28 PM
If only this multi-tool had ring-ding pliers, I'd blow a couple hundred bucks on it.
https://www.westmarine.co…itool-bracelet--16648552
https://youtu.be/qey5rs7_b4c
--
Prindle 18
96734
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Dec 11, 2017 - 11:31 AM
[quote=nohuhu]If only this multi-tool had ring-ding pliers, I'd blow a couple hundred bucks on it.
It should come with a leather jacket.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Dec 12, 2017 - 03:00 PM
I use these in a couple of places:
1. On my side stays to pin the shroud to the adjuster plates. Once attached, both are covered by either a tight-fitting molded cover or a length of PVC pipe to protect from lines and people catching the rings.
2. On the gooseneck pin that holds the boom to the mast and hangs free, but all nearby lines are kept clear by bungee cords in a web.
Everything else is a forged shackle excepting the oversize quick pin I use for the mainsail clew, allowing quick de-powering when arriving on the beach or dock.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Dec 14, 2017 - 07:53 PM
I use these type too (i use what ever i have around)
these are extra susceptible to fouling (getting caught on shorts, sheets and anything that touches it) if you don't have covers (i.e. side stays) these really need to be taped up (as all ring-dings really do) otherwise you are asking for it
as per the shackles - (for any new sailor reading this) i learned (the hard way when i saw my windward side stay unattached while on the wire) to use a tool to secure them, you can't make them tight enough via human hands that your boat can't beat!
Edited by MN3 on Dec 14, 2017 - 07:57 PM. -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Dec 15, 2017 - 03:12 PM
I keep a small pair of vice grips in the pouch on the tramp.
Having loose shackles sucks.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
