Newer rounded Prindle 19 rudders
-
- Rank: Lubber
- Registered: Jun 30, 2012
- Last visit: Jul 29, 2024
- Posts: 61
Posted: Jan 03, 2018 - 06:50 AM
How rare is it to come by a pair of the 2nd generation (rounded) P19 rudders ? I've seen discussions on old vs new but have never seen any for sale . A great looking P19 was just posted on the classifieds which is sporting the newer rudders ! -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jan 03, 2018 - 07:53 AM
I have a set with the newer rudder gudgeons you would need as well -
- Rank: Lubber
- Registered: Jun 30, 2012
- Last visit: Jul 29, 2024
- Posts: 61
Posted: Jan 03, 2018 - 11:36 AM
Hullflyer ,
I sent you a Private message to continue this .. txs ! -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Sep 25, 2024
- Posts: 1459
Posted: Jan 03, 2018 - 01:57 PM
emmettv,
The rudders are hard to find, as are the extended gudgeons and the tiller extensions needed to bring the tiller crossbar forward to the rear beam. Hopefully HULLFLYER has them all.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Lubber
- Registered: Jun 30, 2012
- Last visit: Jul 29, 2024
- Posts: 61
Posted: Jan 03, 2018 - 02:29 PM
Hi Bob ,
Why do simple idea always complicate quickly .. :) you lost me on the tiller extension to bring crossbar more forward . Do the extended gudgeons move the assembly back that much ? -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Sep 25, 2024
- Posts: 1459
Posted: Jan 04, 2018 - 12:23 PM
The extended gudgeons move the rudder aft another two inches-ish to put the rudders in optimal position. The tiller extensions were just longer tubes out of the rudder castings (forward) that made up the difference, bringing the tiller crossbar up into position. I have not tried to sail a Prindle with the tiller bar back that far, so I can't say how it feels.
And I agree. Keeping things simple is a difficult thing to do.
Edited by klozhald on Jan 04, 2018 - 11:24 AM.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jan 04, 2018 - 05:08 PM
My 6.0 has custom gudgeons the fabricator came up with to get clearance for the custom wings
they are extended behind the transom a few inches on brackets
works well ...
I needed to purchase some new tiller extensions last year and needed to trim them to get it them to fit with the wings
i over cut and ended up taking of about 3 or 4 inches. and probably only needed 2
i really have not had/have any issues nor do i really feel any real difference
Edited by MN3 on Jan 04, 2018 - 05:10 PM.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.