Hobie 18 shroud anchor plates
-
- Rank: Mate
- Registered: May 08, 2013
- Last visit: Oct 02, 2023
- Posts: 508
Posted: Feb 03, 2018 - 07:34 PM
Will the Hobie 18 shroud anchor reinforcement plate kit fit my gcat 5.7? -
- Rank: Mate
- Registered: May 08, 2013
- Last visit: Oct 02, 2023
- Posts: 508
Posted: Feb 03, 2018 - 08:22 PM
I think I answered my own question. Looks like they’re too wide to fit the deck lip. Looking to reinforce the shroud anchors on my Gcat 5.7 -
- Rank: Online Pioneer
- Registered: Apr 23, 2002
- Last visit: Feb 18, 2022
- Posts: 211
Posted: Feb 03, 2018 - 11:36 PM
Are you sure they don't fit? I have a couple and can measure them if you are not sure.
--
Bill Mattson
Prindle 19 "Gelli Bean"
Prindle 19 "Cat's Pajamas"
Nacra 5.2 (Will sail her a bit and let her name herself)
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Feb 04, 2018 - 07:54 AM
The H18 anchor plares are curved (inboard/outboard) to fit in a dished out recess in the side of the hull. Unless your G cat has a similar dished out recess (I would be very surprised if it did), the H18 plate isn’t going to sit flat.
sm -
- Rank: Mate
- Registered: May 08, 2013
- Last visit: Oct 02, 2023
- Posts: 508
Posted: Feb 04, 2018 - 10:13 AM
Thanks for the help, both of you. Considering I use to own an 18 I should have known better. I can tell from photos it’s a dead deal. -
- Rank: Mate
- Registered: Jun 15, 2016
- Last visit: Apr 14, 2022
- Posts: 181
Posted: Feb 04, 2018 - 04:15 PM
I have a set of these that I bought for my G-Cat 5.7 about 10 years ago. They are still in the package used because they did not fit.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.