• davidsd
  
  

  • Rank: Lubber
  • Registered: Apr 20, 2005
  • Last visit: Apr 10, 2019
  • Posts: 70

  Posted: Mar 20, 2018 - 01:32 AM

  Found some good deals online at west marine tonight. Here is one for a Ronstan Ratchet block that works great for spin sheets.
  
  https://www.westmarine.co…ise--8738783?recordNum=9
  
  --
  David
  Nacra 5.5SL
  Nacra 5.2 (sold)
  San Diego, CA
  --

  • 
  •  
• PurdueZach
  
  

  • Rank: Mate
  • Registered: Apr 24, 2011
  • Last visit: Mar 20, 2018
  • Posts: 177

  Posted: Mar 20, 2018 - 07:02 AM

  Isn’t this a cheek block? I’m curious how you use this for your spin sheets.
  
  --
  -Zach
  --

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: Dec 04, 2024
  • Posts: 7090

  Posted: Mar 20, 2018 - 10:12 AM

  PurdueZach

  Isn’t this a cheek block? I’m curious how you use this for your spin sheets.

  
  can be used as a turning blocks
  
  the spin sheet is reeved through 4 of these typically: 1 on each shroud (or close ), 2 on the beam
  
  

  • 
  •  
• mikekrantz
  
  

  • Rank: Lubber
  • Registered: Mar 06, 2006
  • Last visit: Aug 23, 2023
  • Posts: 99

  Posted: Mar 20, 2018 - 10:36 AM

  Cheek blocks are designed to be mounted to a flat surface such as the deck...

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: Dec 04, 2024
  • Posts: 7090

  Posted: Mar 20, 2018 - 11:09 AM

  mikekrantz

  Cheek blocks are designed to be mounted to a flat surface such as the deck...

  
  you are completely correct about check blocks typical application but this unit looks like it could easily be used with a dynema strap and hung anywhere and states it comes with a "Shackle/Strap Type: UV-stabilized, multi-strand Dyneema rope link"
  
  the downside to using this as a regular turning block would be the ratchet on/off switch would be upside down on one side of the boat (and may not sit flush like the other side would) - wouldn't bother me unless it scratched up my boat
  
  
  
  Edited by MN3 on Mar 20, 2018 - 11:11 AM.

  • 
  •  
• davidsd
  
  

  • Rank: Lubber
  • Registered: Apr 20, 2005
  • Last visit: Apr 10, 2019
  • Posts: 70

  Posted: Mar 20, 2018 - 01:44 PM

  I use these currently and the on/off goes through the block for access to both sides. They work great.
  
  --
  David
  Nacra 5.5SL
  Nacra 5.2 (sold)
  San Diego, CA
  --

  • 
  •  
• PurdueZach
  
  

  • Rank: Mate
  • Registered: Apr 24, 2011
  • Last visit: Mar 20, 2018
  • Posts: 177

  Posted: Mar 20, 2018 - 04:17 PM

  davidsd

  I use these currently and the on/off goes through the block for access to both sides. They work great.

  
  Great! Can you confirm that this comes with dyneema line?
  
  --
  -Zach
  --

  • 
  •  
• randii
  
  

  • Rank: Mate
  • Registered: May 08, 2017
  • Last visit: Oct 29, 2019
  • Posts: 139

  Posted: Mar 20, 2018 - 04:59 PM

  Great find... never thought I'd see "good deal" and "west marine" in the same sentence... they are undeniably conveniently located for me, but rarely very affordable.
  
  I use the non-cheek version of this as my jib blocks on my H18, with the addition of a becket and cleat, and they work really well.
  
  Randii

  • 
  •  
• davidsd
  
  

  • Rank: Lubber
  • Registered: Apr 20, 2005
  • Last visit: Apr 10, 2019
  • Posts: 70

  Posted: Mar 21, 2018 - 12:00 AM

  Does not come with the line.
  
  --
  David
  Nacra 5.5SL
  Nacra 5.2 (sold)
  San Diego, CA
  --

  • 
  •  
• davidsd
  
  

  • Rank: Lubber
  • Registered: Apr 20, 2005
  • Last visit: Apr 10, 2019
  • Posts: 70

  Posted: Mar 21, 2018 - 01:39 AM

  After looking at this one closer it is a one sided cheek block. Mine does not have the screw hole in them.
  
  --
  David
  Nacra 5.5SL
  Nacra 5.2 (sold)
  San Diego, CA
  --

  • 
  •  
•  
•  

Users on-line

• 0 users

This list is based on users active over the last 60 minutes.