Hi all,
Is anyone using the Ronstan Series 60 Genaker Furler with a Code 0/Hooter/Screacher/Drifter? I'm thinking of simplifying my H17 setup (present square-top, super jib, spinnaker to => main + Code 0). On my F25C which I solo 100% of the time, I find the Code 0 more useful than the spin as it can drift upwind in no air and of course moving to this setup on the H17 would reduce launch/setup/retrieval time.
Thanks,
James
Modified H17 & F25C
Ronstan Series 60 Genaker Furler
-
- Rank: Lubber
- Registered: Feb 26, 2014
- Last visit: Nov 17, 2024
- Posts: 89
Posted: Mar 23, 2018 - 11:19 AM
-
- Rank: Mate
- Registered: Oct 31, 2010
- Last visit: Oct 24, 2024
- Posts: 195
Posted: Mar 23, 2018 - 11:59 AM
I used the Seldon version of that for a top down furling spin on a Supercat 20 https://www.hydesailsdire…sp?ProductCode=SELDEN-GX. That price includes the top swivel too I believe. You also need a continuous line and the anti torsion cable. The system worked well, and would deploy very quickly and was decently fast to furl. I spin sail was pretty big on that boat so the furling spin was easier than the snuffer i had originally. Not sure that it was the best for racing but was nice for cruising. The sheet loads for furling/unfurling are basically zero. AS for set up time it was pretty quick too. Drop the furled spin and store in a bag
Here's a video of my first outing with it. Basically no wind so it doesn't deploy like it would if there was breeze. My friend borrowed the boat for a race and it was really quick rounding the top mark.
https://youtu.be/6SY-hGtA9dI
--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
-- -
- Rank: Mate
- Registered: May 10, 2016
- Last visit: Oct 22, 2024
- Posts: 226
Posted: Mar 23, 2018 - 12:23 PM
I have been thinking of adding this feature to my boat as well. There is a significant price difference between these two products. Can someone please explain the differences?
Thanks,
Brad in Jax
H-16 (1980's)
H-18 (1990's)
G-Cat 5.7 (sold recently)
Stiletto 27 (current)
future A Cat owner -
- Rank: Mate
- Registered: Oct 31, 2010
- Last visit: Oct 24, 2024
- Posts: 195
Posted: Mar 23, 2018 - 12:54 PM
When I was shopping the Seldon was a good bit cheaper than the others, but the Ronstan I just looked up seems to be much cheaper and includes swivel, drum, and continuous line. Not sure if I'm comparing apples to apples though. Didn't have time to look too closely.
https://www.westmarine.co…ennaker-furler--12627212
--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
-- -
- Rank: Mate
- Registered: Aug 15, 2010
- Last visit: Oct 19, 2024
- Posts: 301
Posted: Mar 23, 2018 - 01:10 PM
That the top down furling system that I use on my Hobie 21SE. Really nice.
--
Bill 404 21SE
-- -
- Rank: Lubber
- Registered: Feb 26, 2014
- Last visit: Nov 17, 2024
- Posts: 89
Posted: Mar 23, 2018 - 06:40 PM
A quick Web search reveals just the continuous line furler (bottom drum) is under $200. I had planned to have a new Code 0 made with torque line so top down wouldn't be necessary but I would be open to top down Code 0 without torque line as Doyle has introduced a torque lineless Code 0.
James -
- Rank: Mate
- Registered: Aug 13, 2017
- Last visit: Aug 22, 2024
- Posts: 281
Posted: Mar 25, 2018 - 09:30 AM
If you are on a budget, an old Harken 163 or 165 will do, to make an endless furler:
https://www.facebook.com/…64967332519&l=e4e89f6cb4
Harken has just released their own endless version 1134.
On top of the furler is a swivel made of some Dyneema and a Harken sheave. This is the prototype, the correct version will use a Big Bullet sheave:
https://www.facebook.com/…10213084375957660&type=3
I use a 6mm Liros Anti Torsion line, but a 3mm 19 strand stainless cable will probably also work.
Edited by revintage on Mar 25, 2018 - 09:34 AM.
--
Brgds
Lars
Frankentri 5.8/5.5/Inter20
Aerow trimaran foiler
https://www.facebook.com/groups/1192604934176635
-- -
- Rank: Lubber
- Registered: Apr 20, 2005
- Last visit: Apr 10, 2019
- Posts: 70
Posted: Mar 27, 2018 - 01:39 AM
If you don't have a loose luff than a regular furler will work.
--
David
Nacra 5.5SL
Nacra 5.2 (sold)
San Diego, CA
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.