https://www.ebay.com/itm/…RqIAAOSweDdatqkv&vxp=mtr
That transom is a bit of a mess. I think his comparable prices are too high.
--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
--
'88 H18 $600/OBO Fairfield, CT on Ebay
-
- Rank: Mate
- Registered: Feb 05, 2011
- Last visit: Jun 15, 2021
- Posts: 575
Posted: Mar 25, 2018 - 01:22 PM
-
- Rank: Mate
- Registered: May 08, 2013
- Last visit: Oct 02, 2023
- Posts: 508
Posted: Mar 25, 2018 - 05:23 PM
$1500 is a high quote for that transom repair. Probably less than 1/3 that price in my neck of the woods. Had the exact same damage on my Gcat -
- Rank: Mate
- Registered: Feb 05, 2011
- Last visit: Jun 15, 2021
- Posts: 575
Posted: Mar 25, 2018 - 05:55 PM
Yeah, $1500 is way steep, unless it includes a full recoat of the hull.Looks like a new tramp is needed.
Edited by gahamby on Mar 25, 2018 - 06:58 PM.
--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
-- -
- Rank: Lubber
- Registered: Feb 28, 2017
- Last visit: Jun 20, 2018
- Posts: 90
Posted: Mar 25, 2018 - 08:11 PM
Yep, I paid 500.00 for my prindle18.2 with trailer but have spent 2000.00 at this point includes trampoline. Still have those crummy 5.5 nacra sails that replaced the original prindle sails. I wish I would have paid 3000.00 for a pretty good cat in this range. I will have 3000.00 when finished.I will just have to get my fun out of it because I would never get my money back.
Edited by ec on Mar 25, 2018 - 08:13 PM.
--
Tom Bainbridge, Ga. Hobie16, prindle 18.2
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Mar 27, 2018 - 10:57 AM
It is rare someone gets back what they put into a vessel
$1500 is a lot of cash for a hobie repair but the amount of work (hours + skill) that goes into a real pro job, and the materials are costly
I paid around $500 for a bottom job about 7 years ago - i was talking to the guy a few weeks ago - he said he wouldn't do it again for that little - wasn't worth the time and materials he had into it. I agreed with him
PS he closed his shop years ago, couldn't make make a profit doing cat repair / selling parts
Edited by MN3 on Mar 27, 2018 - 10:58 AM. -
- Rank: Lubber
- Registered: Feb 28, 2017
- Last visit: Jun 20, 2018
- Posts: 90
Posted: Mar 27, 2018 - 01:28 PM
Yep, lots of man hours
--
Tom Bainbridge, Ga. Hobie16, prindle 18.2
--
