Got the P19 out in some heavy air for the first time this past Friday afternoon, and it didn't fall apart.
I love this boat. Way different from the H18. Video below:
https://www.youtube.com/watch?v=ICjJNvMhzvE
--
Bill Mattson
Prindle 19 "Gelli Bean"
Prindle 19 "Cat's Pajamas"
Nacra 5.2 (Will sail her a bit and let her name herself)
--
P19 Restoration Officially Done and Tested
-
- Rank: Online Pioneer
- Registered: Apr 23, 2002
- Last visit: Feb 18, 2022
- Posts: 211
Posted: Apr 08, 2018 - 09:47 PM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Apr 09, 2018 - 09:55 AM
Boat (and sails) look great! enjoy
PS are those shroud extenders i see? -
- Rank: Online Pioneer
- Registered: Apr 23, 2002
- Last visit: Feb 18, 2022
- Posts: 211
Posted: Apr 09, 2018 - 03:53 PM
Yeah. They came with the boat. About the only use for me is that they make stepping the mast easier.
--
Bill Mattson
Prindle 19 "Gelli Bean"
Prindle 19 "Cat's Pajamas"
Nacra 5.2 (Will sail her a bit and let her name herself)
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Apr 10, 2018 - 09:25 AM
how does having more slop in your sidestays make it easier to step?
I would think that would let the head of the mast bob around a bunch (which wouldn't help or hurt stepping but would freak me the hell out while doing it) -
- Rank: Mate
- Registered: Apr 15, 2005
- Last visit: Feb 21, 2024
- Posts: 574
Posted: Apr 12, 2018 - 12:30 PM
MN3, you need some slop in the side stays to get the forestay into position. This is one way to do that.
They also aide in righting.
As to the O.P, nice ride and nice sails! Looks fast. A tip, I would rig a chicken line into the rear beam with a quick release hook in place of your safety tether. The latter looks fine on an offshore boat, but on a beachcat if things go pear shaped, which they do, an open hook (https://www.ronstan.com/marine/range.asp?RnID=223) is a better choice.
Edited by samc99us on Apr 12, 2018 - 12:33 PM. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Apr 12, 2018 - 02:39 PM
Forestay into position? huh?
oh you mean with a hobie style furler (where a adjuster plate slides down)?
I use a Portuguese turnbuckle on both my boats so that's not an issue -
- Rank: Online Pioneer
- Registered: Apr 23, 2002
- Last visit: Feb 18, 2022
- Posts: 211
Posted: Apr 13, 2018 - 01:26 PM
When stepping my mast, I lash the trapeze wires to the front crossbar. So I have side-to-side support the entire time. I just leave the tensioners loose to pin the forestay. (No aduster plate). Then snap 'em back into place. It's pretty quick.
Regarding the safety tether: When I sail to the Channel Islands it actually IS sort of an offshore boat. I've got a jack line running the width of the boat so I can tack without unclipping. On trips with crew, one person is always clipped in when it's rough. When solo, I am usually clipped in unless it's light. This saved my bacon once, when a trapeze wire failed about 4 miles out.
--
Bill Mattson
Prindle 19 "Gelli Bean"
Prindle 19 "Cat's Pajamas"
Nacra 5.2 (Will sail her a bit and let her name herself)
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Apr 13, 2018 - 07:15 PM
Got it, seems like a nice setup (much better than using a hobie furler and needing to loosen/tighten a side-stay -
- Rank: Mate
- Registered: Feb 28, 2018
- Last visit: Nov 26, 2024
- Posts: 147
Posted: Jun 03, 2019 - 02:23 AM
Mattson, how did you rig your safety tether?
--
Captain Chris Holley
Fulshear, TX
'87 Prindle 19 "¡Hijole!"
'74 sunfish "1fish"
-- -
- Rank: Mate
- Registered: Mar 16, 2018
- Last visit: May 10, 2023
- Posts: 126
Posted: Jun 03, 2019 - 11:24 AM
I'm sure Mattson can reply for himself, but he did provide a description of it in a couple posts in this thread:
https://www.thebeachcats.…pic/topic/16315/start/20
--
1998 P18.2
Sailing out of SHBCC, NJ
-- -
- Rank: Mate
- Registered: Feb 28, 2018
- Last visit: Nov 26, 2024
- Posts: 147
Posted: Jun 03, 2019 - 03:36 PM
I missed that thread. Thanks
--
Captain Chris Holley
Fulshear, TX
'87 Prindle 19 "¡Hijole!"
'74 sunfish "1fish"
-- -
- Rank: Mate
- Registered: Mar 16, 2018
- Last visit: May 10, 2023
- Posts: 126
Posted: Jun 03, 2019 - 10:00 PM
If you look at his video from 1:47 to 1:56, you can see where he has the red & white "jack line" tied to the rear corner of the tramp on the port side (I assume around the tramp ropes in that area), and if you freeze-frame frame by frame through the first 10-15 seconds of the video you get a pretty good look at the rig once you figure out which lines are which.
Edited by CatFan57 on Jun 03, 2019 - 11:12 PM.
--
1998 P18.2
Sailing out of SHBCC, NJ
--
