Hello everybody¡¡¡¡
My name is Pepin, I sail in the south of Spain. I'm trying to refurbish an old but in good shape Prindle 19 that I found abandoned at my club. I have tons of questions, the first one: how does the main halyard go down from the top of the mast? Inside the mast, trough the curf of the mast ? A picture will help a lot.
Thanks, this is a wonderful website.
Edited by pepin on Jun 21, 2018 - 04:00 PM.
Catsailor from Spain help Prindle 19
-
- Rank: Lubber
- Registered: Jun 21, 2018
- Last visit: Jun 28, 2018
- Posts: 4
Posted: Jun 21, 2018 - 08:57 AM
-
- Rank: Mate
- Registered: Feb 28, 2018
- Last visit: Feb 13, 2023
- Posts: 145
Posted: Jun 22, 2018 - 01:11 AM
It drops through the curf and then around a turning shiv at the base of the mast. The halyard should be 62 ft at either 3/16 or 1/4. I'm at work or I would send you pictures of my boat
Chris
--
Captain Chris Holley
Fulshear, TX
'87 Prindle 19 "¡Hijole!"
'74 sunfish "1fish"
-- -
- Rank: Lubber
- Registered: Jun 21, 2018
- Last visit: Jun 28, 2018
- Posts: 4
Posted: Jun 22, 2018 - 07:08 AM
Thanks Chris. Now is clear for me. I don't need pictures.
Next things to do: find the ring of the main's halyard and trying to unblock the zipper of the jib. -
- Rank: Lubber
- Registered: Jun 21, 2018
- Last visit: Jun 28, 2018
- Posts: 4
Posted: Jun 25, 2018 - 01:02 PM
Ole¡¡¡¡¡
The boat is ready and so is the crew.
Edited by pepin on Jun 25, 2018 - 08:02 PM. -
- Rank: Lubber
- Registered: Jun 21, 2018
- Last visit: Jun 28, 2018
- Posts: 4
Posted: Jun 28, 2018 - 03:42 PM
Another picture.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.