Hey guys,
I’ve never posted on the sight before but I stalked the forums over the past few years gleaning ideas for a tilt trailer for my Supercat 20. This sight was an indispensable resource during the project. I’ve since finished the trailer and it turned out pretty good. I thought I would link some pictures in case anyone else was feeling ambitious and wanted to try this project. It’s all aluminum and mostly bolt together.
https://www.rednoraa.com/tilt-trailer
Supercat 20 DIY tilt trailer
-
- Rank: Lubber
- Registered: Mar 07, 2016
- Last visit: Jul 30, 2018
- Posts: 3
-
- Rank: Mate
- Registered: Jul 01, 2016
- Last visit: Aug 30, 2023
- Posts: 631
That's cool. You should put those pics in the "Beachcats Technical" photo album section.
--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
-- -
- Rank: Mate
- Registered: Nov 19, 2015
- Last visit: Oct 22, 2024
- Posts: 398
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Brandy! great vid
looks like it was built robust. nice work
where do you sail?
Edited by MN3 on Jul 29, 2018 - 08:55 AM. -
- Rank: Lubber
- Registered: Mar 07, 2016
- Last visit: Jul 30, 2018
- Posts: 3
Mostly the “Big Bend” of north central Florida. I would love to venture farther but even with the trailer travel on the interstate is pretty high stress (or any because I don’t do it often). We may attempt to take it to the Keys this March tho. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
gotcha
yea, i held back comment but i would be scared shitless driving that
i get nervous driving 5miles to my local beach -
- Rank: Mate
- Registered: Jul 19, 2012
- Last visit: Nov 01, 2024
- Posts: 156
With regards to your name, my wife used to keep the cheeks for cooking and sell the rest to the fish house. -
- Rank: Lubber
- Registered: Mar 06, 2006
- Last visit: Aug 23, 2023
- Posts: 99
Add some gas struts and you can lift it with one hand. I used these for my tilt trailer - http://www.bansbach.com
I sent them a diagram of the tilt mechanism, and they spec'd out the struts and mounting positions.
-Mike -
- Rank: Lubber
- Registered: Mar 07, 2016
- Last visit: Jul 30, 2018
- Posts: 3
That was my initial idea Mikekrantz. I ordered the gas struts from the same company; 5’ struts set to 205lb per. Going up was super easy! Getting the boat down however.... I ended up putting the winch post back on for the time being but I Haven’t given up on the idea yea. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
-
- Rank: Mate
- Registered: Jul 19, 2012
- Last visit: Nov 01, 2024
- Posts: 156
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Yea they have been off limit since 1990 both federal and state law
My friends who are fishermen say they are pervasive, steal their fish and should be back on menu ...
I personally don't have a skillet big enough for a 600 pound fish - but I would get one :)
Hogfish are my personal favorite to eat -
- Rank: Mate
- Registered: Jul 19, 2012
- Last visit: Nov 01, 2024
- Posts: 156
We were coming back in from the Hibiscus Cup race several years back. Approaching the remains of an old dock, I saw a "rock" just ahead. I had plenty of clearance so I decided to sail over it. When I got closer I saw it was about 4 feet long and yellow and brown. When it got between the hulls it got the you know what scared out of it. It turned around, bounced off the tramp and hauled ass, leaving a wake. Mr. Goliath was not happy.
I just decorated the backyard porch. One of the decorations is my wife's old rig. 3 feet if 1/4" chain and a foot long hook with a 4 inch mouth. Her and her old friend that had the boat would go out in the Gulf and catch a cuda, bonito or other big bait. Cut it in half, hook it and tie it to the bow cleat with some 1/2 inch rope. When the boat started rocking they would pull the anchor and use the boat to pull it from the bottom.
No finesse and definitely not sporting.