Prindle 16 tiller extension recommendations

Go to page 1 - 2 [+1]:

kelseycampo

Rank: Lubber

Registered: Aug 15, 2018

Last visit: Aug 16, 2018

Posts: 2
Posted: Aug 15, 2018 - 09:28 PM

Just bought a 1980 Prindle 16. There was a after market tiller extension but it broke the first time taking it out. From looking at the manual the way the tiller extension connects to the tiller crossbar is also after market. Looking for recommendations on tiller extensions/connections to the tiller crossbar and where to buy.

Criteria:
-Telescopic
-Easy connect to the tiller crossbar

Found 1 option on amazon,but was curious if anyone has any suggestions!
https://www.amazon.com/dp/B004SANKF0/?coliid=I1DCJTRX1M89F&colid=2FDSWZ6B3PZ4E&psc=0&ref_=lv_ov_lig_dp_it

Thanks in advance for ideas!
-Kelsey

Edited by kelseycampo on Aug 15, 2018 - 09:36 PM.
pbegle

Rank: Mate

Registered: Mar 12, 2003

Last visit: Feb 19, 2021

Posts: 879
Posted: Aug 15, 2018 - 10:33 PM

The best catamaran supply co. is Murrays Sports. Always go there first; they've been around for about 50 years. The part that extension connects to is called the yoke. Pete
kelseycampo

Rank: Lubber

Registered: Aug 15, 2018

Last visit: Aug 16, 2018

Posts: 2
Posted: Aug 16, 2018 - 12:09 AM

Thanks for the help pete! Would you say that the oem yoke is better then aftermarket? Currently i have the after market (see link below) but it broke. I dont have a preference yet becaise i havent sailed with either so im not sure which is better.

Oem: https://www.murrays.com/product/01-0062/

After market: Ronstan Battlestick Universal Joint (55188) https://www.amazon.com/dp/B0000AXVIC/ref=cm_sw_r_cp_apa_hFpDBbDF0VGMW
spfx

Rank: Lubber

Registered: Nov 17, 2013

Last visit: Jul 03, 2020

Posts: 59
Posted: Aug 16, 2018 - 12:24 AM

Plastic vs metal
The original on my P19 is still gong strong. Virtually no wear.
Edchris177

Rank: Chief

Registered: Nov 26, 2009

Last visit: Aug 10, 2024

Posts: 2531
Posted: Aug 16, 2018 - 09:38 AM

That’s a no brainer. OEM yoke is half the cost, & will never break or wear out. My 5.7 yoke is 34 years old

--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
pbegle

Rank: Mate

Registered: Mar 12, 2003

Last visit: Feb 19, 2021

Posts: 879
Posted: Aug 16, 2018 - 10:34 AM

I have the Ronstan Battlestick on my 10 yr old A Cat, but wonder when the rubbery swivel portion will break (like windsurfer uni joints). The Murrays stainless steel yoke is only 9.50 and comes with their 65 dollar telescoping aluminum stick. Pete

Edited by pbegle on Aug 16, 2018 - 10:35 AM.
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Aug 16, 2018 - 07:21 PM

kelseycampoJust bought a 1980 Prindle 16. There was a after market tiller extension but it broke the first time taking it out. From looking at the manual the way the tiller extension connects to the tiller crossbar is also after market. Looking for recommendations on tiller extensions/connections to the tiller crossbar and where to buy.

Criteria:
-Telescopic
-Easy connect to the tiller crossbar

Found 1 option on amazon,but was curious if anyone has any suggestions!
https://www.amazon.com/dp/B004SANKF0/?coliid=I1DCJTRX1M89F&colid=2FDSWZ6B3PZ4E&psc=0&ref_=lv_ov_lig_dp_it

Thanks in advance for ideas!
-KelseyEdited by kelseycampo on Aug 15, 2018 - 09:36 PM.

arriba hot stick are very widely used around here
but there are many brands, i have used alum, fiberglass and carbon fiber ones
i have used non telescoping and they all have pros and cons

http://www.arribastick.com/
they are nice but have a life span (wear out) - it is possible to service them with some epoxy but ...

as mentioned, most beach catamaran use the yoke style shown above - but anyboat can be modified and every sailor has their own "method" of rigging

Edited by MN3 on Aug 16, 2018 - 07:23 PM.
spags

Rank: Lubber

Registered: Dec 27, 2016

Last visit: May 24, 2019

Posts: 57
Posted: Dec 05, 2018 - 05:41 PM

I just bought the aluminum telescopic tiller for $65. Good price and good quality.

--
Frank
Prindle 15/Hobie 16/Hobie 14T
--
spags

Rank: Lubber

Registered: Dec 27, 2016

Last visit: May 24, 2019

Posts: 57
Posted: Dec 05, 2018 - 05:42 PM

... From Murray's... Forgot to mention that.

--
Frank
Prindle 15/Hobie 16/Hobie 14T
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Dec 06, 2018 - 10:23 AM

spagsI just bought the aluminum telescopic tiller for $65. Good price and good quality.

In my experience: Alum sticks don't last long

as soon as you drop it on a corner of your deck lid - it will dent
once it dents ... it's just a matter of time till it fails (breaks in 1/2)
samc99us

Rank: Mate

Registered: Apr 15, 2005

Last visit: Feb 21, 2024

Posts: 574
Posted: Dec 06, 2018 - 12:30 PM

pbegleI have the Ronstan Battlestick on my 10 yr old A Cat, but wonder when the rubbery swivel portion will break (like windsurfer uni joints). The Murrays stainless steel yoke is only 9.50 and comes with their 65 dollar telescoping aluminum stick. PeteEdited by pbegle on Aug 16, 2018 - 10:35 AM.

Red Gear Racing has these for roughly $20. You can order them direct from Australia but it doesn't really work out price wise when you factor shipping for 1 to the mix. These have lines through them so when the rubber fails you still have a connection to the tiller crossbar:

http://www.rileyfittings.com/pyf_range/tiller_extensions/pyf205
gahamby

Rank: Mate

Registered: Feb 05, 2011

Last visit: Jun 15, 2021

Posts: 575
Posted: Dec 06, 2018 - 12:45 PM

IF you can bear the cost, get a Spinlock EA 2000. It doesn't have a twist telescoping fitting. It uses detent buttons.
The mechanism is all external so it can be rinsed out and lubed. Replacement parts are available. The swivel connection to the crossbar is real nice. The big asymmetric grip relives hand fatigue. When I go to extend the handle it only goes out one button at a time so I don't round up too hard.
I admit they're godawful expensive. I have found it to be worth the price
http://www.apsltd.com/ea-…s-asymmetric-silver.html
This link is just an example. Shop around for a better price.

--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
--
samc99us

Rank: Mate

Registered: Apr 15, 2005

Last visit: Feb 21, 2024

Posts: 574
Posted: Dec 06, 2018 - 01:11 PM

Thats a pretty beefy tiller extension designed for big boats. I suspect it has little benefit over the Nacra carbon tiller extension. It comes apart for easy rinsing, is durable and less than $300, plus lighter than almost any extension out there.
gahamby

Rank: Mate

Registered: Feb 05, 2011

Last visit: Jun 15, 2021

Posts: 575
Posted: Dec 06, 2018 - 03:20 PM

Going to have to disagree on the big boat characterization. They're designed for racing dinghies and beach cats. I haven't found the weight to be an issue. I find the beefiness a distinct advantage. It's a personal preference issue. I wouldn't trade mine for anything else.

--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
--
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Dec 06, 2018 - 03:46 PM

F

gahambyGoing to have to disagree on the big boat characterization. They're designed for racing dinghies and beach cats. I haven't found the weight to be an issue. I find the beefiness a distinct advantage. It's a personal preference issue. I wouldn't trade mine for anything else.

What about holding the main sheet and the tiller with one hand? Is it possible and easy with that handle? I need to do that all the time from the trap, can’t pull the sheet with the other hand alone.
gahamby

Rank: Mate

Registered: Feb 05, 2011

Last visit: Jun 15, 2021

Posts: 575
Posted: Dec 06, 2018 - 04:01 PM

The "D" handle makes that very easy. I like the "D" handle because I can change hand positions.
All that being said, that Nacra handle does look nice. It has a long reach.
https://www.murrays.com/product/56-30271/

--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
--
gahamby

Rank: Mate

Registered: Feb 05, 2011

Last visit: Jun 15, 2021

Posts: 575
Posted: Dec 06, 2018 - 04:03 PM

The "D" handle makes that very easy. I like the "D" handle because I can change hand positions.
All that being said, that Nacra handle does look nice. It has a long reach.
https://www.murrays.com/product/56-30271/

--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
--
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Dec 06, 2018 - 04:53 PM

I love the cork ball grip, it’s functional and looks cool. I made my current one from a keychain that I found casually at my local store.
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Dec 06, 2018 - 05:11 PM

I like to adjust the extension rather short, having always the grip in front of you when out on the trap. It makes it easier to sheet in. The ball grip is very functional in this mode.
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Dec 06, 2018 - 05:55 PM

Quotethe Nacra carbon tiller extension. It comes apart for easy rinsing, is durable and less than $300, plus lighter than almost any extension out there.

hey Sam, how durable is this stick?
as durable as the old arriba hot stick ?