My Nacra 5.0 has very basic batten caps that hold tension via a square not. It is not exactly the most adjustable system. Can I simply order any old Hobie batten caps? and holy cow they are more expensive then I thought.
--
FYC, Nacra 5.2 "Chris's Flyer" & Nacra Playcat & Farrier Tramp
Previously owned: Trac 14, H14, H16, H18, N5.0, G-cat 5.0
--
Adding Batten Caps
-
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
-
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
Well a little more research found me the answer.
Admin feel free to delete both of my post.
https://www.thebeachcats.…ms/viewtopic/topic/15778
--
FYC, Nacra 5.2 "Chris's Flyer" & Nacra Playcat & Farrier Tramp
Previously owned: Trac 14, H14, H16, H18, N5.0, G-cat 5.0
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Don't bother with adjustable types. You are not going to see a measurable increase in performance. An '83 5.0, with old sails....just insert the batten enough to take the wrinkles out, tie off & go sailing!
Edited by Edchris177 on Apr 18, 2019 - 11:36 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Double post
Edited by Edchris177 on Apr 18, 2019 - 11:36 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Apr 22, 2015
- Last visit: May 21, 2023
- Posts: 484
I replaced the original style "tie off" caps (which I hate) with Hobie 16 caps and they work fine. I really like the ease of adjustment with the Hobie caps. I release batten tension after every sail and re-tension at the start of the next sail based on conditions.
I have a newer mainsail that came with no batten caps at all, just a hole drilled in the end. I truly hate that setup as tension is VERY hard to set. I end up tying and re-tying several times per batten to get the tension where I want it. Caps with cleats are the way to go.
Edited by leeboweffect on Apr 19, 2019 - 10:45 AM.
--
Hobie 16 (3 formerly)
MacGregor 25 (formerly)
Chrysler Dagger 14 (formerly)
NACRA 5.0 (currently)
High Point, NC
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.