Interesting posting. Might be good for parts if nothing else.
https://tampa.craigslist.…homemade/6961495030.html
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
G Cat trimaran.
-
- Rank: Mate
- Registered: May 09, 2009
- Last visit: Aug 14, 2024
- Posts: 686
Posted: Aug 25, 2019 - 09:34 AM
-
- Rank: Mate
- Registered: May 08, 2013
- Last visit: Oct 02, 2023
- Posts: 508
Posted: Aug 25, 2019 - 06:54 PM
I may be picking it up for the rudder system. If anyone has any interest in the hulls and cross beams let me know.
Edited by jalex on Aug 26, 2019 - 08:46 AM. -
- Rank: Lubber
- Registered: Dec 25, 2015
- Last visit: Jul 26, 2022
- Posts: 42
Posted: Aug 26, 2019 - 12:14 AM
God, who came up with that. More weight, more wetted area, and the same righting moment -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Aug 26, 2019 - 09:07 AM
I see no benefit to this set up either -
- Rank: Mate
- Registered: Apr 07, 2017
- Last visit: Nov 05, 2024
- Posts: 365
Posted: Aug 27, 2019 - 07:41 AM
If the outside hulls were small amas instead of full sized hulls this could make a decent platform for a small tri. If it had a hard deck instead of a tramp and a small outboard it could be a flats boat. It would probably be pretty fast even without much power. Could be an interesting project in the right hands.
--
Bill Townsend
G-Cat 5.0
Sarasota
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Aug 27, 2019 - 08:41 AM
yes it could be a lot of things - currently it is a raft or floating dock or at best, a dolly to drag your gear to an island with
Edited by MN3 on Aug 27, 2019 - 08:51 AM.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.