Centreboard Mylar on Tornado
-
- Rank: Lubber
- Registered: Jul 29, 2019
- Last visit: Sep 23, 2019
- Posts: 3
Posted: Sep 23, 2019 - 06:24 PM
I’m currently replacing the Mylar (Dura-lar) water seals on the bottom of the hulls below the centreboard boxes . Is heavy duty contact cement the best adhesive for this job o is there something better? -
- Rank: Lubber
- Registered: Jul 05, 2009
- Last visit: Oct 02, 2019
- Posts: 18
Posted: Sep 24, 2019 - 03:43 PM
I've used Goop. Don't let it skim-over before you put the tape on. -
- Rank: Mate
- Registered: Oct 24, 2006
- Last visit: Jun 21, 2023
- Posts: 160
Posted: Sep 30, 2019 - 01:57 PM
I have an article saved somewhere that gives more details; will see if I can find it. I think you'd want to use something like Sikaflex.
I'd go for what's known as a half gasket, much cleaner, but a little more work the first time you do it.
https://drive.google.com/drive/folders/0B2jHf8coA9KibTU5Q3V4VnBFd1U -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Sep 30, 2019 - 02:20 PM
I have been using HD contact cement for a decade now, as does everyone i sail with whom has a centerboard (about 10 of us). some have tried to epoxy them on ... makes removal a 1000x harder
i do sometimes epoxy the tips so they don't peel up
works fine
i use a water proof one from a local gel coat company, i would not be surprised if it is just private labeled
https://www.fgci.com/item…ear-Quart-High-Strength/
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.