Cheers from WA - new Hobie 21SC owner :: Catamaran Sailboats at TheBeachcats.com

Welcome anonymous guest

Please Support
TheBeachcats.com

Cheers from WA - new Hobie 21SC owner

Go to page 1 - 2 [+1]:

diewurst

Rank: Lubber

Registered: Oct 11, 2019

Last visit: Apr 29, 2020

Posts: 16
Posted: Oct 11, 2019 - 12:11 PM

Hello all, after years of sailing absence (I think about 18?), I bought recently bought Hobie 21SC.
I have the itch to get back on the water.

Boat is in good shape minus paint issues and front tramp.
Prev. owner regularly added some ablative anti-fouling but first owner added some hard antifouling coat, which is brittle and coming off over time, taking the newer coats with it. Plan is to go back to gel-coat, Have to see what stripper / method works best and leaves the gel-coat intact. Suggestions here are very welcome.

Front tramp: Prev. owner placed a solid vinyl tarp on top of the old, raggedy net-tramp. Now the stitching came undone / ripped. I guess the yarn chosen was not overly UV resistant. I hope to find a way to reuse the mounting outline of the original tramp, or have a new one made.
Maybe... I'd even attempt to make my own. I've welded vinyl tarp before but do not have equipment for sewing.

Trailer just got some new lights and grommets - still have to wire a few things up.
Front supports are big Murray cradles, rear old dual rollers. The 21SC is heavy and I hope to come up with a solution that adds better support in the rear. Also want to add a better stop in the front the cross-beam can be pulled up against (maybe a T with two stoppers).

Oh, and I have to work on winterizing the cat and part properly.
At least the mast is down and sails & rudders are washed and inside already.

Edited by diewurst on Oct 11, 2019 - 02:17 PM.
boatbore

Rank: Lubber

Registered: Jul 14, 2015

Last visit: Aug 20, 2024

Posts: 77
Posted: Oct 11, 2019 - 02:07 PM

Congratulations ! Is this the one that was for sale in sequim? Where will you be launching from?

--
Dart 20
--
diewurst

Rank: Lubber

Registered: Oct 11, 2019

Last visit: Apr 29, 2020

Posts: 16
Posted: Oct 11, 2019 - 02:11 PM

Indeed, it was.

The boat will be located in Warm Beach, WA but I also plan to explore some other waters after making the trailer a bit more boat friendly.

Photo location should look familiar to you.
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Oct 11, 2019 - 02:29 PM

[/quote]
Nice looking boat
i would suggest you do not travel with your rudders down

i would suggest you remove them completely unless you are driving a very short distance on paved roads with no bumps
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Oct 11, 2019 - 02:36 PM

QuoteFront supports are big Murray cradles, rear old dual rollers. The 21SC is heavy and I hope to come up with a solution that adds better support in the rear.

double rollers are fantastic for beach cats
they spread the load out and are a good choice for locations that have snow

last comment: anti foul on a beach cat? why? these boats are not meant to be mored or stored in the water... no need for that stuff
diewurst

Rank: Lubber

Registered: Oct 11, 2019

Last visit: Apr 29, 2020

Posts: 16
Posted: Oct 11, 2019 - 02:51 PM

I agree on the rudders. I trusted the prev. owner who towed it like that with no issue and had brief road contact, entering the driveway at home. It buffed out, lesson learned, Cpt hindsight was right.

Quotelast comment: anti foul on a beach cat? why? these boats are not meant to be mored or stored in the water... no need for that stuff

Prev. owner had it moored in the summers and lived only a few miles away from it.
charlescarlis

Rank: Mate

Registered: Jun 30, 2018

Last visit: Oct 29, 2024

Posts: 590
Posted: Oct 11, 2019 - 03:20 PM

Same with mine - the previous guy had copper anti-fouling on it. I'm also interested in what takes the stuff off easiest. I'm guessing sanding, but would rather not sand as much as possible to preserve the thickness of the fiberglass. Don't think I, personally have a choice. Since I've had a very successful 1st season, my 21 is getting new paint this winter.

I've purchased a bunch of galvanized steel to weld up stops, just like mentioned to pull the boat up to. They will use rubber, keel vee-stops and I'm going to connect the two with a cross bar that will hold a permanently mounted gin pole. The stops will have eye bolts as well, in line with the pivot point of the mast ball so I can attach the trap lines for stabilization of the mast as I raise the mast with the winch. Sounds complicated, but should have 90%+ done by Monday - it should be easy. I'll post pics.

BTW - I re-sewed my tramp with a home sewing machine (Janome). Worked great - just used dual-duty polyester thread. The original thread had completely rotted away. But, it'll need to be redone with proper V-92 thread I'm sure. Still, it worked and is holding up fine now. Sailrite has some pretty good vid's on how to do this for a new tramp, if you're inclined. I then added a couple of custom pockets for halyard, water bottles/other stuff. Handy. Good luck! You'll love these boats.

--
Chuck C
NACRA 500 Mk2
--
diewurst

Rank: Lubber

Registered: Oct 11, 2019

Last visit: Apr 29, 2020

Posts: 16
Posted: Oct 11, 2019 - 03:31 PM

Chuck, thanks for tossing all the specifics in the the post - that fills in blanks and does come in handy!

This is what I came across - pretty similar to what you are describing.

https://www.boattrailerpa…wc-bow-stop-assy-wo8412/
windflower

Rank: Lubber

Registered: Nov 22, 2016

Last visit: Aug 31, 2023

Posts: 67
Posted: Oct 11, 2019 - 06:58 PM

I used citristrip on a previous boat. Found putting it on late evening gave it all night to work without drying out. Blasted it off with a pressure washer next morning. Only problem was the paint comes off in pieces which stuck to the nearby shrubbery. Didn't harm the gelcoat at all.
charlescarlis

Rank: Mate

Registered: Jun 30, 2018

Last visit: Oct 29, 2024

Posts: 590
Posted: Oct 15, 2019 - 02:20 PM

That's virtually what I'm building, except the cross piece will be 5 feet, with welded eye bolts at either end to attach bridle and gin pole lines to, in order to make a permanently mounted gin pole on the trailer that pivots at same height and in-line with mast. So far so good, except that half way through welding up the hinge to a mounting plate I discovered I was using stainless wire filler...doh! Wondered why it was spitting so much and couldn't get a decent weld puddle to save my life. Weird thing is, it held... I'll finish with normal steel on the other angles.

Pictures coming. later this week.

--
Chuck C
NACRA 500 Mk2
--
klozhald

Rank: Chief

Registered: Apr 19, 2011

Last visit: Sep 25, 2024

Posts: 1459
Posted: Oct 15, 2019 - 08:34 PM

charlescarlisBTW - I re-sewed my tramp with a home sewing machine (Janome). Worked great - just used dual-duty polyester thread. The original thread had completely rotted away. But, it'll need to be redone with proper V-92 thread I'm sure.

You'll get a season or two from the poly thread if you religiously keep it covered, and maybe a few more when you upgrade to V-92. That is a lot of work, and you are cutting fibers in the tramp every time you sew. Consider biting the bullet and using Tenara thread which will last a decade in the sun. The manufacturer gives it a lifetime guarantee.

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
charlescarlis

Rank: Mate

Registered: Jun 30, 2018

Last visit: Oct 29, 2024

Posts: 590
Posted: Oct 15, 2019 - 09:41 PM

Yeah, I hear you, but on a 5-10yr. Old tramp (about), its hard to justify buying $120 worth of thread at the moment. New tramp build? Absolutely. That'll come in, oh about 2 years, so...cheap it is! Ill likely have some good thread by then as I'm slowly building up sail/canvas tools and supplies.

Thanks for the tip, though. Thought the V-92 would've lasted longer. Huh, good to know.

--
Chuck C
NACRA 500 Mk2
--
shortyfox

Rank: Mate

Registered: Apr 07, 2017

Last visit: Nov 05, 2024

Posts: 365
Posted: Oct 16, 2019 - 06:46 AM

Go on line and check out Sunrise Yacht Products out of St. Pete for tramps. Great quality and great prices.

--
Bill Townsend
G-Cat 5.0
Sarasota
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Oct 16, 2019 - 07:51 AM

shortyfoxGo on line and check out Sunrise Yacht Products out of St. Pete for tramps. Great quality and great prices.

they are far from the cheapest on the market but they are probably the highest quality
the h21 costs $457.14 (for the better thread) and has a 5 year Warranty
the cheaper thread is about $60 less with a 2 year Warranty

i have used them exclusively in my 20 years of beach cat sailing (i tried slo but they failed to do the job)

https://multihullnets.com…ils.aspx?PartNumber=H-21
diewurst

Rank: Lubber

Registered: Oct 11, 2019

Last visit: Apr 29, 2020

Posts: 16
Posted: Oct 21, 2019 - 09:46 AM

Looks like they make decent products - but all they offer is mesh.
In cold WA waters, I am looking to go with tarp(aulin) in the front as well to keep me & the crew a bit drier.
bill40421SE

Rank: Mate

Registered: Aug 15, 2010

Last visit: Oct 19, 2024

Posts: 301
Posted: Oct 21, 2019 - 10:02 AM

It looks like SLO Sail and Canvas mades a nice vinyl tramp for $400 for the upgrade thread in four different colors.

--
Bill 404 21SE
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Oct 21, 2019 - 10:16 AM

diewurstLooks like they make decent products - but all they offer is mesh.
In cold WA waters, I am looking to go with tarp(aulin) in the front as well to keep me & the crew a bit drier.

2 issues with the non mesh tramps are:
1 - they hold water so you are sitting in a puddle
2 - slightly more windage which can be a big issue in a capsize

ymmv
boatbore

Rank: Lubber

Registered: Jul 14, 2015

Last visit: Aug 20, 2024

Posts: 77
Posted: Oct 21, 2019 - 02:09 PM

MN3
diewurstLooks like they make decent products - but all they offer is mesh.
In cold WA waters, I am looking to go with tarp(aulin) in the front as well to keep me & the crew a bit drier.

2 issues with the non mesh tramps are:
1 - they hold water so you are sitting in a puddle
2 - slightly more windage which can be a big issue in a capsize

ymmv

Get the best Goretex drysuit you can find. Even on the warmest days water temperatures in the salish sea hover around 50° and you're going to get wet regardless of tramp material. Staying warm and dry is the difference between enjoying your capsize or having a near death experience.
Slo made a custom tramp for my dart 20 that was $200 less than the stock tramp from anywhere else, I'm very happy with it.
It's a mesh tramp, I agree with MN3 on the reasons

Edited by boatbore on Oct 21, 2019 - 03:09 PM.

--
Dart 20
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: Oct 21, 2019 - 03:17 PM

QuoteGet the best Goretex drysuit you can find.

+1

SLO
"Our products are warranted against defects due to workmanship or material flaws for 1 year. "

"Sunrise Yacht Products will repair to the customer's satisfaction or replace at no charge any Net or Trampoline, which fails under normal use within the first year. Nets or Trampolines failing under normal use in succeeding years of the warranty period will, at our discretion, be repaired at no charge, or given a pro-rated credit toward the purchase of a replacement. "

I have owned at least 5 tramps from Sunrise - never have i needed any warranty work
I have had them restitch old tramps

get what ya payed for
smfinley

Rank: Mate

Registered: Apr 24, 2005

Last visit: Apr 18, 2023

Posts: 709
Posted: Oct 23, 2019 - 10:38 AM

Whatever trampoline you get make sure you get the correct boat. Confusion between the 21SE and 21SC is common and the trampolines are very different. Make sure you get the correct one, likely made to order and hard to return. Enjoy your new boat.

--
Scott,
‘92 H18 w/SX wings
‘95 Hobie Funseeker 12 (Holder 12)
‘96/‘01/‘14 Hobie Waves
--