Go-Pro Mount?? :: Catamaran Sailboats at TheBeachcats.com

Welcome anonymous guest

Please Support
TheBeachcats.com

Go-Pro Mount??

Go to page 1 - 2 [+1]:

topcat16

Rank: Lubber

Registered: Aug 31, 2010

Last visit: Oct 28, 2020

Posts: 40
Posted: Feb 13, 2020 - 10:17 AM

I know it's somewhere on the site but I've not been able to find suggestions on how/where to mount a Go-Pro camera.....specifically on a Hobie 16

thanks in advance.....I know that MN3 will know where the post is
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Feb 13, 2020 - 10:27 AM

This may help
https://www.youtube.com/watch?v=KzGJ5tle2AU
My advice is have several monunts and mix them on your videos, otherwise your videos look always the same. On your head is a very good optiopn, don't forget about that one.

Edited by Andinista on Feb 13, 2020 - 10:30 AM.
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: Dec 04, 2024

Posts: 7090
Posted: Feb 13, 2020 - 12:03 PM

QuoteMy advice is have several monunts and mix them on your videos,

+1

Search on this site for camera mount, and a few variations of that phrase

https://www.thebeachcats.…nc=viewtopic&topic=14037
topcat16

Rank: Lubber

Registered: Aug 31, 2010

Last visit: Oct 28, 2020

Posts: 40
Posted: Feb 13, 2020 - 03:33 PM

some good videos but I was hoping for a look at the mounts and where they're attached
martin_langhoff

Rank: Mate

Registered: Oct 26, 2016

Last visit: Nov 04, 2024

Posts: 233
Posted: Feb 13, 2020 - 06:29 PM

I have a 1 meter CF tube I clamp on my spinnaker pole. You can do the same, even longer tubes from plumbing supplies, combined with bicycle mounts. The plumbing tubes can be bent with a heat gun too.

https://www.youtube.com/watch?v=8grbU2i7ap4
leeboweffect

Rank: Mate

Registered: Apr 22, 2015

Last visit: May 21, 2023

Posts: 484
Posted: Feb 15, 2020 - 06:09 PM

Here's how I do it. Between the bridles, no pole. For 2020 I plan to play around with other mounting locations including the head cam. My cams don't have the phone control feature (too old) so that you can see remotely what the camera's seeing which would make it fairly easy to aim the head cam. Any one have practice and or a technique for aiming the head cam passively (I'm talking about pre-aiming the bracket angle etc. prior to shooting so the camera is "seeing" what you're looking at).

https://www.thebeachcats.…ictures?g2_itemId=127744

Edited by leeboweffect on Feb 15, 2020 - 07:35 PM.

--
Hobie 16 (3 formerly)
MacGregor 25 (formerly)
Chrysler Dagger 14 (formerly)
NACRA 5.0 (currently)
High Point, NC
--
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Feb 16, 2020 - 08:49 AM

https://vimeo.com/232271161
That’s my version of cheap gymbal, inspired on Nacdaddy’s. Just a standard GoPro mount, I filed down the joints to allow free pivoting and used a smaller diameter bolt that I had in hand. My boat has a bow foil so
I just sticked a mount base underneath it. have another one above it, one at the top of the mast and one on a hull, just aft of the main beam. I’ve also tried with tube mounts at the tiller cross arm but it gets in the way of the tiller extension. if I had to choose only one it would be the head mount, second preference is the gymbal.

Edited by Andinista on Feb 16, 2020 - 08:55 AM.
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Feb 16, 2020 - 09:01 AM

Always use a lanyard
catsalor

Rank: Lubber

Registered: Apr 23, 2017

Last visit: Feb 19, 2021

Posts: 64
Posted: Feb 18, 2020 - 08:37 AM

I use a helmet when I sail lost a
few brain cells over the years on the boom
Would you mount the gopro on top of you helmet
or on the side. Which works best?
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: Dec 04, 2024

Posts: 7090
Posted: Feb 18, 2020 - 08:53 AM

QuoteWould you mount the gopro on top of you helmet
or on the side. Which works best?

I think you will hit the camera into the boom a lot if you put it on the top
cyberspeed

Rank: Lubber

Registered: Apr 20, 2004

Last visit: Aug 06, 2021

Posts: 88
Posted: Feb 23, 2020 - 09:12 PM

I use Contour Roam for a side helmet mount. Waterproof without a case so get good personal audio. Put tape over the microphone hole and that will eliminate wind noise without ruining the quality.

--
Craig Van Eaton
West Palm Beach
Supercat 20
www.teamcyberspeed.com
www.sailseries.com
--
tnell

Rank: Mate

Registered: Apr 15, 2004

Last visit: Jan 13, 2023

Posts: 358
Posted: Feb 24, 2020 - 02:09 PM

Joseph Bennett, JoyriderTV, mounts one on the bill of a ball cap. It keeps the camera lower than a top of the head type mount. BTW, if you haven’t seen his YouTube channel it’s definitely worth watching.

--
Tim
Collierville (Memphis), TN
Supercat 15--sold :(
Hobie monocat--given
Vanguard 15--traded for...
Nacra 4.5--sold
Nacra 5.7
Hobie 14–sold to make room for...
Supercat 17–sold
--
jonathan162

Rank: Mate

Registered: May 03, 2006

Last visit: Aug 03, 2024

Posts: 276
Posted: May 28, 2020 - 04:51 PM

Andinistahttps://vimeo.com/232271161
That’s my version of cheap gymbal, inspired on Nacdaddy’s. Just a standard GoPro mount, I filed down the joints to allow free pivoting and used a smaller diameter bolt that I had in hand. My boat has a bow foil so
I just sticked a mount base underneath it. have another one above it, one at the top of the mast and one on a hull, just aft of the main beam. I’ve also tried with tube mounts at the tiller cross arm but it gets in the way of the tiller extension. if I had to choose only one it would be the head mount, second preference is the gymbal.

See, you've got the right idea here! A fixed mount on the boat is stupid, because you don't see the boat heel properly. Instead of the hull rising, the boat stays level and the water falls away, and our brains aren't any good at correcting for that. I tried a bunch of different fixed mount locations (the bow, the boom, even the tiller crossbar, which gave me some excellent footage of my main block!) and couldn't stand any of them. I also rejected the head mount, because we're always looking all over the place and the result is unwatchably chaotic.

So I've decided to stick with a gimbal, so the view is true to the horizon and when you fly a hull you actually see the boat come up! I cobbled up a homebrew with a little friction damping so it wouldn't swing around wild+free and mounted it just under the forestay/bridle connection. Worked okay, could have been better. So I shopped around for a single-axis stabilizer (roll only - we don't care about pitch and yaw), but found that the one(s?) that used to be on the market apparently no longer are, except for one that's too expensive for me.

But I left the ebay search in place and snagged one a few months back... which is now stuck at a post office in Montana because my buddy who lives just north of the border can't go down to pick up the mail (his, mine, and others') thanks to the COVID border closure...

[edit]

Here's an example of what I'm talking about:

https://www.youtube.com/watch?v=JEncasCO_RI

Edited by jonathan162 on May 29, 2020 - 03:36 PM.

--
Southern Alberta and all over the damn place.
*
1981 SuperCat 20 "Roberts' Rockets"
1983 SuperCat 19
TriFoiler #23 "Unfair Advantage"
Mystere 17
Unicorn A-Class (probably made by Trowbridge) that I couldn't resist rescuing at auction.
H18 & Zygal (classic) Tornado - stolen and destroyed - very unpleasant story.
Invitation and Mistral and Sunflower and windsurfers w/ Harken hydrofoils and god knows what else...
--
jlooby

Rank: Lubber

Registered: Feb 26, 2014

Last visit: Dec 16, 2024

Posts: 90
Posted: May 28, 2020 - 05:01 PM

On my H17, I of course have wings which makes mounting on the boat easy. I forget the geometry of the H16 tramp supports but you may be able to mount a pole alongside the trampoline (i.e. running vertical alongside the tramp mount). If the bar needs to be deflected, use a piece of PVC and bend it to conform to the necessary deflection using a heat gun (fill pvc with sand so the bend doesn't compress).

Note, the spin pole is a good option and I actually saw a good video where the camera extended off the back of the boom.

James
F25C+
H17+
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: May 29, 2020 - 02:11 PM

QuoteBut I left the ebay search in place and snagged one a few months back... which is now stuck at a post office in Montana because my buddy who lives just north of the border can't go down to pick up the mail (his, mine, and others') thanks to the COVID border closure...

Please share the results and the gimbal you got. Whenever possible..
jonathan162

Rank: Mate

Registered: May 03, 2006

Last visit: Aug 03, 2024

Posts: 276
Posted: May 29, 2020 - 03:16 PM

It's the Soocoo PS2 - same as buddy's using in that youtube clip, though it seems to appear under other brands, such as Ikan:

https://ikancorp.com/shop…tphone-and-gopro-wenpod/

With any luck the border should be reopening in about three weeks. My major concern is whether it's waterproof enough. You can take a look at it here:

https://www.gearbest.com/…cessories/pp_494809.html

But I tried to order one and they just kept canceling the order without any explanation, so I'm guessing they don't actually stock them (anymore) and just can't be bothered to update their site. Or something. Oh - they're now showing it as "discontinued", though it'd make more sense for them to just remove it.

Edited by jonathan162 on May 29, 2020 - 03:20 PM.

--
Southern Alberta and all over the damn place.
*
1981 SuperCat 20 "Roberts' Rockets"
1983 SuperCat 19
TriFoiler #23 "Unfair Advantage"
Mystere 17
Unicorn A-Class (probably made by Trowbridge) that I couldn't resist rescuing at auction.
H18 & Zygal (classic) Tornado - stolen and destroyed - very unpleasant story.
Invitation and Mistral and Sunflower and windsurfers w/ Harken hydrofoils and god knows what else...
--
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: May 29, 2020 - 05:09 PM

Thanks! There is the "Weewok Sport X1" on Aliexpress, I guess a chinese imitation. I might click buy .. I live in Chile and have used Aliexpress during the pandemia, no issues so far.
jonathan162

Rank: Mate

Registered: May 03, 2006

Last visit: Aug 03, 2024

Posts: 276
Posted: May 29, 2020 - 05:58 PM

Probably not a knockoff - my guess is that there's only one manufacturer of this thing, but it's sold under a bunch of different brands.

The search on there isn't working for me at all - can you post a link?

--
Southern Alberta and all over the damn place.
*
1981 SuperCat 20 "Roberts' Rockets"
1983 SuperCat 19
TriFoiler #23 "Unfair Advantage"
Mystere 17
Unicorn A-Class (probably made by Trowbridge) that I couldn't resist rescuing at auction.
H18 & Zygal (classic) Tornado - stolen and destroyed - very unpleasant story.
Invitation and Mistral and Sunflower and windsurfers w/ Harken hydrofoils and god knows what else...
--
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: May 29, 2020 - 07:49 PM

https://m.es.aliexpress.c…uctBottomBar.viewDetails
Sorry I misspelled it
Wewow Sport X1
jonathan162

Rank: Mate

Registered: May 03, 2006

Last visit: Aug 03, 2024

Posts: 276
Posted: May 29, 2020 - 08:18 PM

I think this is the correct English version:

https://www.aliexpress.com/item/32885704194.html

but it says "sorry, no longer available".

Edited by jonathan162 on May 29, 2020 - 08:19 PM.

--
Southern Alberta and all over the damn place.
*
1981 SuperCat 20 "Roberts' Rockets"
1983 SuperCat 19
TriFoiler #23 "Unfair Advantage"
Mystere 17
Unicorn A-Class (probably made by Trowbridge) that I couldn't resist rescuing at auction.
H18 & Zygal (classic) Tornado - stolen and destroyed - very unpleasant story.
Invitation and Mistral and Sunflower and windsurfers w/ Harken hydrofoils and god knows what else...
--