My mid 80s Nacra has rudder pins that uses 2 cotter pins to retain it.
Has anyone converted it to a tooless retention syatem? The Marstrom has small stainless sheet metal tangs bolted to the transom, so attachment is a breeze.
Any downside to this? Assuming its done right.
--
John
Nacra 5.0
CT
--
Nacra rudder pin upgrade ???
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Feb 28, 2020 - 04:20 PM
-
- Rank: Lubber
- Registered: Jul 14, 2015
- Last visit: Aug 20, 2024
- Posts: 77
Posted: Feb 29, 2020 - 12:19 PM
How about using a split ring instead of a cotter pin
--
Dart 20
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Feb 29, 2020 - 06:08 PM
Both my Nacra use split rings.
My Dart uses a small spring tab, that can be pushed aside by hand.
The biggest issue, as I see it, the Nacra pins have to drop out the bottom. Due to the shape of the castings, they cannot be removed upwards.
The drain plug is right below the bottom gudgeon, there really isn’t any meat left to attach anything below. You would have to attach something to the side, that stuck out, over to the pin.
If that ever failed, or got bent out of the way, the pin drops out, your rudders explode, & you have an unsailable Cat, & probably a hefty bill to find new blades after the whole works hits the bottom of the lake.
Just use split rings, you only have to remove the top ring. I have a small “shackle dog” with a slightly sharpened edge for when fingernails are too soft.
Edited by Edchris177 on Feb 29, 2020 - 06:32 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 03, 2020 - 04:54 AM
Good idras, thanks guys.
--
John
Nacra 5.0
CT
-- -
- Rank: Mate
- Registered: Apr 15, 2004
- Last visit: Jan 13, 2023
- Posts: 358
Posted: Mar 03, 2020 - 11:24 AM
Keep an eye on .the top split ring, it gets a lot of wear.
--
Tim
Collierville (Memphis), TN
Supercat 15--sold :(
Hobie monocat--given
Vanguard 15--traded for...
Nacra 4.5--sold
Nacra 5.7
Hobie 14–sold to make room for...
Supercat 17–sold
-- -
- Rank: Mate
- Registered: Feb 28, 2018
- Last visit: Feb 13, 2023
- Posts: 145
Posted: Mar 03, 2020 - 07:33 PM
I use stainless safety clip pins to hold my pins in and so far they are holding up well
--
Captain Chris Holley
Fulshear, TX
'87 Prindle 19 "¡Hijole!"
'74 sunfish "1fish"
-- -
- Rank: Mate
- Registered: Feb 28, 2018
- Last visit: Feb 13, 2023
- Posts: 145
Posted: Mar 03, 2020 - 07:36 PM
https://www.murrays.com/product/21-0126/
--
Captain Chris Holley
Fulshear, TX
'87 Prindle 19 "¡Hijole!"
'74 sunfish "1fish"
--
