I bought thimbles from McMaster to make a new stay. The 1/8 inch thimbles (both light and medium) are much smaller than what is currently on the Nacra. The existing parts measure and compare to 3/16 inch thimbles. The larger thimbles keeps the cable from rubbing on chain plate. Is going up 1/16 standard practice?
--
John
Nacra 5.0
CT
--
Thimbles for standing rigging-sizing question
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Jun 17, 2020 - 09:03 AM
-
- Rank: Mate
- Registered: Feb 05, 2011
- Last visit: Jun 15, 2021
- Posts: 575
Posted: Jun 17, 2020 - 05:01 PM
If the thimbles are too big the wire will stress coming out of the sleeve.This can create a break point. I've been dis-masted because of that.
https://www.nicopress.com/
What would the factory ship you?
--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Jun 18, 2020 - 06:15 PM
The thimbles that match the ones on the Nacra, prob factory, are 3/16 " light duty, mcmaster pn 8914T25. This is for 1/8 inch rigging., 1x19.
--
John
Nacra 5.0
CT
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.