I’m trying to buy a sail from a guy on here. When I look up shipping rates for an 8 foot long package the price goes up well over 100-150 if the box is 10 inches square instead of 8 inches square. Do y’all think a 27is h foot luff main would roll up to fit in the 8 inch box. Otherwise I may have to have it folded and rolled. It’s Mylar.
--
Tim
Collierville (Memphis), TN
Supercat 15--sold :(
Hobie monocat--given
Vanguard 15--traded for...
Nacra 4.5--sold
Nacra 5.7
Hobie 14–sold to make room for...
Supercat 17–sold
--
Mailing a mainsail
-
- Rank: Mate
- Registered: Apr 15, 2004
- Last visit: Jan 13, 2023
- Posts: 358
Posted: Jul 01, 2020 - 11:23 PM
-
- Rank: Lubber
- Registered: Jul 05, 2018
- Last visit: Jul 06, 2023
- Posts: 63
Posted: Jul 02, 2020 - 08:55 AM
If mylar, you must roll the sail - never fold it. Roll and put in round tube. Diameter of tube for mainsail and battens would need to be 10" or 12". 8" seems right for a jib. You could call a sail maker and see how they ship. I have found UPS better on larger freight than fedex. -
- Rank: Mate
- Registered: Apr 15, 2005
- Last visit: Feb 21, 2024
- Posts: 574
Posted: Jul 02, 2020 - 10:32 AM
Just shipped an A-Cat main from GA to PA, Fedex had the best rate, $75. I think we managed to get it into an 8 or 9" box. Pull half the battens out and roll as tight as you can. You'll also have to check UPS and USPS, as shipping rates vary drastically depending on the to/from address. -
- Rank: Mate
- Registered: May 09, 2009
- Last visit: Aug 14, 2024
- Posts: 686
Posted: Jul 02, 2020 - 12:03 PM
If you can use a commercial address many times it is a substantial savings on shipping. I have found fed ex ground to be the best price wise. Service is another story with them.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jul 02, 2020 - 05:17 PM
I've shipped a Hobie 18 Pentex main, they key was that the overall box length stayed under 108" and as small a girth as possible. You can fiddle with the cost estimator and see the changes. I kind of "made" a long box out of two four foot by 8 inch square boxes and a LOT of tape. That was in 2012, it was still expensive but can't remember exactly.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
--
