My Nacra came with a carabiner, and it is too small to capture the grommet. What is a good upgrade??
--
John
Nacra 5.0
CT
--
What is your prefered jib clew attachment hardware????
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Aug 13, 2020 - 09:14 AM
-
- Rank: Lubber
- Registered: Mar 06, 2006
- Last visit: Aug 23, 2023
- Posts: 99
Posted: Aug 13, 2020 - 09:17 AM
soft shackle -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Aug 13, 2020 - 09:35 AM
Thanks.
--
John
Nacra 5.0
CT
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Aug 13, 2020 - 09:41 AM
No shackle. Tie the pigtails for the jib blocks directly to the clew plate. Install and remove the jib sheet from the blocks/boat each time you rig. This eliminates any chance for the shackle to hangup on the mast/diamond wires, one less part to fail, and the jib sheet gets stored in the sailbox when not being used which extends it life.
Been doing it this way for several years and it is definitely my preferred method. -
- Rank: Mate
- Registered: Oct 26, 2016
- Last visit: Nov 04, 2024
- Posts: 233
Posted: Aug 13, 2020 - 12:32 PM
Good discussion on this very topic here - https://www.thebeachcats.com/forums/viewtopic/topic/18178 - -
- Rank: Online Pioneer
- Registered: Apr 23, 2002
- Last visit: Feb 18, 2022
- Posts: 211
Posted: Aug 14, 2020 - 10:45 AM
Sister clips. Came with the boat, are light, and work really well.
--
Bill Mattson
Prindle 19 "Gelli Bean"
Prindle 19 "Cat's Pajamas"
Nacra 5.2 (Will sail her a bit and let her name herself)
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Aug 14, 2020 - 01:54 PM
+1
respectfully prefer to attach the pigtails via a soft shackle
no need to remove the jib lines (ever) unless you want to store. I store under tarp and more so i prefer to save the rigging time - to each their own for sure!
Edited by MN3 on Aug 14, 2020 - 01:56 PM. -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Aug 19, 2020 - 07:47 PM
I would love a soft shackle solution, but I need 24" from my jib clew to the jib sheet blocks.
So I would need a monkey fist and loop on each of the three ends. What type of line will be small enough and strong enough to knot in this way? Either the loop or the stopper knot end will have to go through the clew grommet and the jib blocks.
MN3, what kind of knots are those you show?
I suppose I could just tie the clew end and use the soft shackle technique on the jib blocks...
My current line is 3/8" polyester double braid, and I mention this only to reference the strength needed.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Apr 22, 2015
- Last visit: May 21, 2023
- Posts: 484
Posted: Aug 21, 2020 - 10:16 AM
I use this Wichard bit as I had my jib built with an adjustable clew plate and it allows for quick on the water adjustment of foot/leech tension.
https://www.fisheriessupp…rbine-hook-with-eye-2313
--
Hobie 16 (3 formerly)
MacGregor 25 (formerly)
Chrysler Dagger 14 (formerly)
NACRA 5.0 (currently)
High Point, NC
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Aug 21, 2020 - 01:29 PM
The top part is a very small line (4" maybe) eye spliced with 4mm of dynema with an overhand knot on the end. nothing special at all. doesn't even need to be spiced, you could just tie a small loop. the trick is the size of the loop (not so big it wont hold, not so small you can't push the ball through it)
the bottom part is around 1' of 4mm dynema with end splices
the 2 lines are not tied together, simple luggage tagged together
this has never failed -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Aug 24, 2020 - 01:55 PM
Thank you!
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.