I have a would-be favorite sailing spot at Pelican Point (10321 Co Rd 1, Fairhope, AL 36532). It is a would be because there is a powerline right over the beach that goes to single street lamp for the ramp. I reached out to the power company last year to request they bury it, but it was a half hearted effort and I ended up just leaving a voicemail.
For my next action I want to come off as someone with a little more backing. Any ideas on what best for making them alter the line path?
--
FYC, Nacra 5.2 "Chris's Flyer" & Nacra Playcat & Farrier Tramp
Previously owned: Trac 14, H14, H16, H18, N5.0, G-cat 5.0
--
Community Action on Powerlines
-
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
Posted: Feb 10, 2021 - 05:44 PM
-
- Rank: Mate
- Registered: Apr 15, 2005
- Last visit: Feb 21, 2024
- Posts: 574
Posted: Feb 10, 2021 - 05:48 PM
Yep, show up with the cash to pay to bury it or re-route it. -
- Rank: Lubber
- Registered: Jan 08, 2007
- Last visit: Mar 23, 2023
- Posts: 49
Posted: Feb 11, 2021 - 11:23 AM
Call your county parks department if so owned and ask for someone up the pecking order and try that route. Point out, that this is a potential liability situation that could expose the property owner to litigation.
If the property is owned by the county then if no luck go to the Risk Department and or County Attorney's office with the same argument.
They grasp the seriousness of litigation and exposure in the local paper.
You will probably find there are no live exposed wires but are encased in insulation.
Good luck though
--
Forrest
I-20 USA-645
Hernando, Florida
"There's not enough rum in the drum"
-- -
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
Posted: Feb 11, 2021 - 01:02 PM
I spoke with the utility company. They said they would be happy to relocate it is the State of AL pays for it. They can relocate it for $500 for each pole riser and I think he said $1 per foot for pulling line, but that seems low. All told it was $1,200 if the conduit is existing. I reached out to Parks & Rec last year and they told me to go to another park for launching and that while this was not expensive it was also not a priority.
I guess I can always coordinate with local news and park my cat mast up by the power line for an interview.
--
FYC, Nacra 5.2 "Chris's Flyer" & Nacra Playcat & Farrier Tramp
Previously owned: Trac 14, H14, H16, H18, N5.0, G-cat 5.0
-- -
- Rank: Mate
- Registered: Jun 30, 2018
- Last visit: Nov 21, 2024
- Posts: 593
Posted: Feb 11, 2021 - 02:55 PM
Hobie had a big push for this kind of power line moving thing to stop people from getting killed. Might do sme research on that and how they approached it. I move power feeds all the time at work. It's going to be more than $1,200. First, they're going to need to run the appropriate conduit, as mentioned, then likely as not will want to pull new wire. May be that cheap if this is a seriously short run though. If you know an electrician, get him to give you a rough estimate.
To actually get it done, however probably looks like an up-front agreement with the parks board that if you raise the money to do it, the money would go to the project.
--
Chuck C
NACRA 500 Mk2
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Feb 11, 2021 - 03:48 PM
i think your best recourse is to get in touch with the town/city council but lacking any community support or reason they may say "yes we will look into it" ... and never move on it -
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
Posted: Feb 19, 2021 - 03:16 PM
The county reach back out to me and they have funding for small projects like this (thanks to gasoline taxes). They will be procuring a total cost and will let me know if they are proceeding with it.
--
FYC, Nacra 5.2 "Chris's Flyer" & Nacra Playcat & Farrier Tramp
Previously owned: Trac 14, H14, H16, H18, N5.0, G-cat 5.0
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Feb 19, 2021 - 05:14 PM
That is awesome! -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Feb 19, 2021 - 05:17 PM
You can explain to the city council that the reason for plastic top on all US made hobies was for settlement of an expensive lawsuit after the 7th kid died in the early '70's. My invited crew mate (and a certain buyer) died on the factory Stiletto 30 prototype in 1980 in Sarasota, Fl. I personally caused several wires to be raised in Michigan and just missed a wire going up a creek on the Bruce Grey penninsula of Georgion Bay. Canada Power quickly raised that one. The country wasn"t ready for the new tall mast breed of sailboat in the '70"s and incidents happened everywhere. Pete -
- Rank: Mate
- Registered: Jun 30, 2018
- Last visit: Nov 21, 2024
- Posts: 593
Posted: Feb 19, 2021 - 06:47 PM
There were a couple of damned unfortunate events here in Texas where I think scouts died hitting lines while sailing on a lake. I think in the past 5 years, and the local authority was getting raked over the coals for the low lines.
--
Chuck C
NACRA 500 Mk2
-- -
- Rank: Mate
- Registered: May 03, 2006
- Last visit: Aug 03, 2024
- Posts: 276
Posted: Feb 20, 2021 - 11:37 AM
Fwiw, here's my experience with it.
The short version is: Sometimes people Just Get the danger and liability issues, and don't need any convincing.
https://nitpickingbastard…-who-do-the-right-thing/
Edited by jonathan162 on Feb 20, 2021 - 05:50 PM.
--
Southern Alberta and all over the damn place.
*
1981 SuperCat 20 "Roberts' Rockets"
1983 SuperCat 19
TriFoiler #23 "Unfair Advantage"
Mystere 17
Unicorn A-Class (probably made by Trowbridge) that I couldn't resist rescuing at auction.
H18 & Zygal (classic) Tornado - stolen and destroyed - very unpleasant story.
Invitation and Mistral and Sunflower and windsurfers w/ Harken hydrofoils and god knows what else...
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.