Quick question.
Curious if you do any type of clear coat on battens to minimize glass splinters after sanding/tapering them.
If so whataya like best?
Thx!
Clear coating sanded/tapered battens?
-
- Rank: Lubber
- Registered: Aug 26, 2020
- Last visit: Mar 21, 2022
- Posts: 34
Posted: May 24, 2021 - 12:26 PM
-
- Rank: Mate
- Registered: Jun 30, 2018
- Last visit: Dec 15, 2024
- Posts: 598
Posted: May 24, 2021 - 03:38 PM
seems like the only two options you have are either epoxy or automotive urethane clear coat. I wouldn't think a UV stabilized acrylic would either work good or last long. But, I got to say, I hate those splinters! I'm guessing you're also referring to the pultruded fiberglass battens, yes? That actually makes a difference as to what sticks or what prep you'll need to do. Too much epoxy and you stiffen the batten, so...
--
Chuck C
NACRA 500 Mk2
Hobie 21se (sold)
-- -
- Rank: Lubber
- Registered: Aug 26, 2020
- Last visit: Mar 21, 2022
- Posts: 34
Posted: May 25, 2021 - 05:21 PM
Yea, I was leaning towards a spray able clear coat.
Would need to be very flexible though.
Doesn’t even have to be clear actually.. who cares what color it is. Can’t see em.
Plasti dip? Hmm
Nacra 5.7 fiberglass battens that have a cross section that resembles Saturn. -
- Rank: Mate
- Registered: Feb 05, 2011
- Last visit: Jun 15, 2021
- Posts: 575
Posted: May 25, 2021 - 06:05 PM
How about polyester resin?
--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: May 26, 2021 - 12:33 PM
why go through all of this?
do you plan on handling them a lot?
how about you wear gloves while sanding, stick em in the sail and never touch em again? -
- Rank: Mate
- Registered: Jun 30, 2018
- Last visit: Dec 15, 2024
- Posts: 598
Posted: May 26, 2021 - 01:24 PM
Touche' Meh, I end up playing with mine... I know, I know - I shouldn't. At least the top one has to come out to be able to roll up the main, still I've never had the need that I can recall, but have RBS battens which don't seem to be splintery like the stock Hobie's.
--
Chuck C
NACRA 500 Mk2
Hobie 21se (sold)
-- -
- Rank: Lubber
- Registered: Aug 26, 2020
- Last visit: Mar 21, 2022
- Posts: 34
Posted: May 26, 2021 - 01:25 PM
Fair enough.
They are already sanded.
Might play with them, and a fish scale for fun.
Might just stuff em in, and go sailing!
Just thought if there were an easy way to make them not so irritating/ dangerous;) -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: May 26, 2021 - 03:17 PM
LOL.
Paint em!
epoxy em!
flexSeal em!!! go nuts !!! :)
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.