Hey all,
None of my jib battens have leech caps - are they supposed to? Some of them don't have luff caps either. One or two do. I've done some internet searching but I'm not sure what the right way to secure the battens in the jib is supposed to be.
--
Bryan in Poplar Grove, IL
Supercat 17, unknown year. Future project
Hobie 16, 1977 - died a spectacular death https://youtu.be/Y7O22bp2MVA
Hobie 16, 1978 - current boat
--
tying in jib battens
-
- Rank: Mate
- Registered: Oct 07, 2020
- Last visit: Feb 29, 2024
- Posts: 359
Posted: Jun 21, 2021 - 02:31 PM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jun 21, 2021 - 02:48 PM
get in touch with Aquarius Sails 651 462 7245
They are the SuperCat company -
- Rank: Mate
- Registered: Oct 07, 2020
- Last visit: Feb 29, 2024
- Posts: 359
Posted: Jun 21, 2021 - 03:02 PM
Sorry, I should have said this is for my Hobie 16.
--
Bryan in Poplar Grove, IL
Supercat 17, unknown year. Future project
Hobie 16, 1977 - died a spectacular death https://youtu.be/Y7O22bp2MVA
Hobie 16, 1978 - current boat
-- -
- Rank: Lubber
- Registered: Oct 11, 2003
- Last visit: Jun 21, 2021
- Posts: 1
Posted: Jun 21, 2021 - 05:53 PM
there are two styles of jib batten attachment for the Hobie 16. The most common version uses a batten cap on the jib batten to hold the batten in and control the tension on the jib batten. You can purchase batten caps from any Hobie dealer. On newer boats in Europe there is a velcro strip that holds the batten in the jib. The velcro strip uses a push pin to insert the batten and the velcro holds it in.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.