I have a new rope to install in my block that came with the boat that was definitely strung wrong. Cannot find any diagrams online. Can anyone share a pic? Thanks in advance.
--
Central Iowa
2017 Hobie Getaway
Memento Mori...
--
Nacra 5.8 main sheet 7:1 diagram, anyone….? Or picture..?
-
- Rank: Lubber
- Registered: Oct 07, 2020
- Last visit: May 17, 2024
- Posts: 33
Posted: Jul 20, 2021 - 12:37 AM
-
- Rank: Mate
- Registered: May 09, 2009
- Last visit: Aug 14, 2024
- Posts: 686
Posted: Jul 20, 2021 - 07:00 AM
This is a picture of a low profile 7:1. Click on the pic to enlarge.
https://www.thebeachcats.…ictures?g2_itemId=130420
Edited by pknapp66 on Jul 20, 2021 - 07:04 AM.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jul 20, 2021 - 08:13 AM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jul 20, 2021 - 08:16 AM
hmmm i guess these don't show a 7:!
Edited by MN3 on Jul 20, 2021 - 08:17 AM. -
- Rank: Lubber
- Registered: Oct 07, 2020
- Last visit: May 17, 2024
- Posts: 33
Posted: Jul 20, 2021 - 08:49 AM
The irony is that mine does not have the anchor loop below the top block. It only has it on the bottom.
--
Central Iowa
2017 Hobie Getaway
Memento Mori...
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Jul 20, 2021 - 09:51 AM
You need to be able to tie off at the top block to go 7:1. If you have Harken Carbo blocks (like shown in the 3rd post of this thread), you can pass the end of the sheet through the center of the upper block and tie off with an 8 knot. Or if your boat has a boom, you can add another boom bale and tie off to that (but I believe the 5.8 is boomless). Otherwise you’re going to have to get creative because if you can only tie off to the lower block, the most you can get is 6:1 purchase.
sm -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jul 20, 2021 - 10:52 AM
Just so you can call things by the correct names:
if it controls a sail it is called a sheet
you don't string blocks, you reeve them
you tie off to a becket (or a Strop if it is cloth) -
- Rank: Lubber
- Registered: Oct 07, 2020
- Last visit: May 17, 2024
- Posts: 33
Posted: Jul 20, 2021 - 12:06 PM
Here is my main block with the original sheet, and I don't believe it is correct. I want to reeve the new sheet and cannot find a diagram anywhere.
Edited by zenwalrus on Jul 20, 2021 - 10:48 AM.
--
Central Iowa
2017 Hobie Getaway
Memento Mori...
-- -
- Rank: Lubber
- Registered: Oct 07, 2020
- Last visit: May 17, 2024
- Posts: 33
Posted: Jul 20, 2021 - 12:50 PM
I wish I had the becket at the top...But it is on the bottom, and the reverse of all the modern blocks I am finding, that have the becket in the middle and the small block out front.
--
Central Iowa
2017 Hobie Getaway
Memento Mori...
-- -
- Rank: Lubber
- Registered: Oct 07, 2020
- Last visit: May 17, 2024
- Posts: 33
Posted: Jul 20, 2021 - 12:58 PM
Mine is just slightly different...Cannot seem to find mine anywhere.
--
Central Iowa
2017 Hobie Getaway
Memento Mori...
-- -
- Rank: Lubber
- Registered: Oct 07, 2020
- Last visit: May 17, 2024
- Posts: 33
Posted: Jul 20, 2021 - 06:20 PM
UPDATE:
If anyone else performs an exhaustive search for this elusive, rare and undocumented 8:1 Mainsail block system, here is the correct method.
--
Central Iowa
2017 Hobie Getaway
Memento Mori...
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Jul 20, 2021 - 08:12 PM
Picture makes all the difference - yep, your system is designed for 8:1, not 7:1.
sm -
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Jul 26, 2024
- Posts: 590
Posted: Jul 26, 2021 - 10:36 AM
I think the Nacra 5.7 7:1 is similar. In this case, the 7th turn is accomplished with a single block below the lower triple that leads to the cam cleats and fair lead for the main sheet. In my setup the sheet also acts as the traveler control.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
--
Users on-line
This list is based on users active over the last 60 minutes.