
Here is the damage, behind the Cat Trax wheels below the 5.7 decal. The hull was pushed in and sliced moving forward. This was sitting underwater.

After grinding and re-aligning the repair, it was obviously repairable. Yesterday I got 5-layers of epoxy saturated woven glass on the repair on the inside of the hull, and 2-layers on the outside. This image is after the first layer of West 407 fairing, followed by sanding and a second layer of West 410 microspheres in epoxy. This image shows the first layer before sanding

Today, everything was sanded down, and I got the first coat of Interlux Primekote primer on. I will do my best to get a good appearance with Interlux Perfection Arctic White to match the boat, but I will inevitably have a line from the new paint since this is just a patch. I don't know if I'll bother to paint the hull later, but at least I'll be back on the water later this week.

--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
--