Just got a topcat 9’1” and I don’t know if the rigging is right
-
- Rank: Lubber
- Registered: Aug 07, 2021
- Last visit: Aug 08, 2021
- Posts: 3
Posted: Aug 07, 2021 - 10:54 PM
It’s been difficult to find info on this boat however since it was made in the 80s. The rigging that it came with is a simple 2 pulley system with one being connected to the end of the boom and the other to a fixed bar on the aft. I can’t find other boats that are rigged in this manner so I’m not sure if it’s ok. The pulley is only 1 rope wide so the main sheet just kinda hangs loose in it. -
- Rank: Mate
- Registered: May 03, 2006
- Last visit: Aug 03, 2024
- Posts: 276
Posted: Aug 07, 2021 - 10:55 PM
You're talking about the mainsheet? How about a photo and we should be able to sort you out?
--
Southern Alberta and all over the damn place.
*
1981 SuperCat 20 "Roberts' Rockets"
1983 SuperCat 19
TriFoiler #23 "Unfair Advantage"
Mystere 17
Unicorn A-Class (probably made by Trowbridge) that I couldn't resist rescuing at auction.
H18 & Zygal (classic) Tornado - stolen and destroyed - very unpleasant story.
Invitation and Mistral and Sunflower and windsurfers w/ Harken hydrofoils and god knows what else...
-- -
- Rank: Lubber
- Registered: Aug 07, 2021
- Last visit: Aug 08, 2021
- Posts: 3
Posted: Aug 07, 2021 - 11:29 PM
I made a new post with a photo
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.