Welcome anonymous guest

Please Support
TheBeachcats.com

deck port stuck  Bottom

  • anyone know a trick to open a stuck deck port. i can not open after taking the boat out
    there is no damage but it will not turn
  • There should be a recessed area on the top of the plate (if it's the screw on type), take a piece of wood, put it against the recessed area and tap it with a hammer.

    --
    Bill Townsend
    G-Cat 5.0
    Sarasota
    --
  • once you get it off, take the lid and clean it in a container (so it is submerged)
    use air if possible to spray out the tracks (on the boat) and finish off with a wet rag - get all the sand and grit out - will make opening easier next time



    Edited by MN3 on Sep 30, 2021 - 10:53 AM.
  • Also, when applying pressure to unscrew it, bang the boat with the soft side of your first. Anywhere near the deck port works. But this will, in essence, help as well. Good luck. Sometimes that can be a punk.
  • If it’s a screw-in plate, you can take a pair of pliers, open them wide, and put the end of each of the handles into each of the recesses of the lid (pliers pointing straight up). This will give you something easy to grip onto to spin the lid free.

    sm
  • Here is what I did. Simple tool - piece of wood, a couple of bushings, and a couple of screws.
    https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=135848&g2_serialNumber=3

    --
    Bryan in Poplar Grove, IL
    Supercat 17, unknown year. Future project
    Hobie 16, 1977 - died a spectacular death https://youtu.be/Y7O22bp2MVA
    Hobie 16, 1978 - current boat
    --
  • waiex191Here is what I did. Simple tool - piece of wood, a couple of bushings, and a couple of screws.
    https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=135848&g2_serialNumber=3


    I needed more leverage to open a deck port last weekend and thought of this suggestion. Then I looked for something more at hand and this worked perfectly :)

    https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=135922&g2_serialNumber=3
  • Now we need a contest who can find the biggest tool to open a port! If I only had access to an excavator or something.

    --
    Bryan in Poplar Grove, IL
    Supercat 17, unknown year. Future project
    Hobie 16, 1977 - died a spectacular death https://youtu.be/Y7O22bp2MVA
    Hobie 16, 1978 - current boat
    --
  • https://i.imgur.com/yqpSYDP.jpg

    --
    1978 H18
    1983 H18 (some of it)
    --
  • is there a deck port down there?
  • raisehullhttps://i.imgur.com/yqpSYDP.jpg


    What the hell is that white stuff? Looks dangerous.....

    --
    Scott

    Prindle Fleet 2
    TCDYC

    Prindle 18-2 Mod "FrankenKitty"
    Tornado Classic "Fast Furniture"
    Prindle 19 "Mr. Wiggly"
    Nacra 5.8 "De ja vu"
    Nacra 5.0
    Nacra 5.8
    Tornadoes (Reg White)
    --
  • MN3once you get it off, take the lid and clean it in a container (so it is submerged)
    use air if possible to spray out the tracks (on the boat) and finish off with a wet rag - get all the sand and grit out - will make opening easier next timeEdited by MN3 on Sep 30, 2021 - 10:53 AM.



    Good idea... I have been using Sailkote on the lids to help... seems to do ok.

    --
    Scott

    Prindle Fleet 2
    TCDYC

    Prindle 18-2 Mod "FrankenKitty"
    Tornado Classic "Fast Furniture"
    Prindle 19 "Mr. Wiggly"
    Nacra 5.8 "De ja vu"
    Nacra 5.0
    Nacra 5.8
    Tornadoes (Reg White)
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options
  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.