Fiberglass Thin Spots
-
- Rank: Lubber
- Registered: Sep 26, 2021
- Last visit: Jun 08, 2023
- Posts: 70
Posted: Oct 22, 2021 - 08:08 AM
Hi Everyone, I was finally able to get the top panel removed from my starboard hull on my Mystere 6.0. Good news is as far as I can tell it is watertight. I shined a light all over and didn't see any places where the light comes through. I did however see some thin spots that look like sloppy repairs from the previous owner. They don't have any flex but I wanted to strengthen them a bit before I reseal the hull. I was think of sanding the outside smooth after this guy's previous attempt and reinforcing with Bondo Glass. Another thought was laying a strip of fiberglass cloth on the inside and leaving the outside alone. or a combination of both
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.