Hi!
The tiller that came with my boat broke and my spare is having issues telescoping out fully so I’m considering buying a new one. I have a P18 and I was wondering if anyone had any recommendations for a tiller or about how far out it should be able to extend?
--
~1985 Prindle 18~
--
Telescoping Tiller Length
-
- Rank: Lubber
- Registered: Feb 15, 2021
- Last visit: Feb 21, 2022
- Posts: 7
Posted: Feb 09, 2022 - 05:56 PM
-
- Rank: Mate
- Registered: Aug 18, 2003
- Last visit: Dec 13, 2023
- Posts: 880
Posted: Feb 09, 2022 - 10:39 PM
Meanwhile you may rivet the spare one at a fixed length, if that’s better than how it is now. For me, if I can hold it on the trap near the daggerboard or so, with my arm extended, that’s enough. If it’s too long your cannot approach it to your other hand to help pulling the mainsheet. -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Feb 10, 2022 - 07:25 AM
Length depends on a few things
How tall you are, if you are 6 foot 2 or 5 foot 5
What is your trapeze style, all the way flat (racing position) or not as far -
- Rank: Mate
- Registered: Apr 07, 2017
- Last visit: Nov 21, 2024
- Posts: 367
Posted: Feb 10, 2022 - 07:30 AM
On a large board less boat like your Prindle 18, when you're trapped out and by yourself, there are conditions where you may want to be slightly forward of the middle of the boat to make the best progress to weather so you'll need a pretty long one. A hiking stick that long of fixed length will be cumbersome when passing it around the mainsheet and also awkward when you want to sit forward of the main beam. Get a telescoping one.
--
Bill Townsend
G-Cat 5.0
Sarasota
-- -
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Jul 26, 2024
- Posts: 590
Posted: Feb 10, 2022 - 09:40 AM
The PowerStick telescoping carbon tiller extension is $275 from Murrays. You can shop around.
https://www.murrays.com/p…carbon-tiller-extension/
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Lubber
- Registered: Mar 15, 2012
- Last visit: Feb 10, 2022
- Posts: 17
Posted: Feb 10, 2022 - 12:59 PM
I bought one of these for my Hobie 16 after my Arriba HotStick broke. It's a little thinner but made out of carbon so the strength is about the same. It's not quite as easy to adjust but after a couple of sails, I was fine with it.
--
Chris Lewis
Wilmette, IL
-- -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Nov 20, 2024
- Posts: 410
Posted: Feb 11, 2022 - 09:31 AM
I would suggest 8'. That will allow you to slide forward a bit while on the trap. I have added length to all of mine because I trap insanely forward.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
-- -
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Jul 26, 2024
- Posts: 590
Posted: Feb 11, 2022 - 09:32 AM
It's been a long time since the Arriba was available, and it cost under $200 in the day. Great stick, and I still use one. The PowerStick seems to be the closest available substitute.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Mate
- Registered: Feb 28, 2018
- Last visit: Feb 13, 2023
- Posts: 145
Posted: Feb 12, 2022 - 03:34 PM
There is also malcheski Composits. They make a very nice tiller extension.
https://www.malcheskicomposites.com/
--
Captain Chris Holley
Fulshear, TX
'87 Prindle 19 "¡Hijole!"
'74 sunfish "1fish"
-- -
- Rank: Lubber
- Registered: Feb 15, 2021
- Last visit: Feb 21, 2022
- Posts: 7
Posted: Feb 17, 2022 - 04:01 PM
I'm about 5' tall and I usually end up scooting forward when I'm trapped out. I haven't haven't able to get the boat out solo yet so I'm not 100% sure how far up I would go.
--
~1985 Prindle 18~
-- -
- Rank: Lubber
- Registered: Feb 15, 2021
- Last visit: Feb 21, 2022
- Posts: 7
Posted: Feb 17, 2022 - 04:08 PM
Do you know how the PowerStick compares to the Malcheski Composites?
--
~1985 Prindle 18~
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Feb 18, 2022 - 10:18 AM
Where abouts are you?
I have a brand new, never used 8’ Arriba Hot Stik, (telescoping ). Still has the stickers on it. It’s been sitting in my basement since the Mystere 6.0XL days. I had both sets of beams for the Beast, but never sailed it in the 8’ wide configuration, only 10’ wide. I needed a 10’ Stik, so the other one never got used.
I can’t remember if it’s the FX-3 or FX-4, I’ll have to get up to the lake house & look.
Edited by Edchris177 on Feb 18, 2022 - 10:23 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Feb 18, 2022 - 10:42 AM
I think the Arriba sticks are still available, at least they have a website.
http://arribastick.com/index.asp
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Feb 15, 2021
- Last visit: Feb 21, 2022
- Posts: 7
Posted: Feb 21, 2022 - 01:06 PM
The only tiller I can find through this link is the PowerStick from Murray's which is one of the two main options I'm seeing.
--
~1985 Prindle 18~
--
Users on-line
This list is based on users active over the last 60 minutes.